เสร็จสิ้น จัดเรียงตาม
ลด12%
ลำโพง
:
ร้าน Audiomate.bkk: Mission LX-2 MK II The LX-2 MKII uses a 25mm microfiber dome tweeter to produce crisp and detailed high frequencies, with a neodymium magnet for maximum magnetic force in a small space. The tweeter is lightweight, with impressive transient attack for all the high frequencies. The 5 inch bass driver featured on the LX-2 MKII is a new version of the DiaDrive from Mission, using a seamless curvilinear diaphragm instead of a cone and hub cap. The driver on the LX-2 MKII speakers is constructed from an advanced dual-layer fibre formulation, which exhibits excellent self-damping and has a very high stiffness to mass ratio. A high strength ferrite magnet ensures the magnetic is directed precisely within the voice coil, for an ultra-linear excursion and a focused performance. The bass driver uses comb-tooth separations around the driver to help scatter interfering reflections. This helps the driver produce a smoother frequency response with less resonance. For the MKII version of the LX Series, Mission has updated the crossover to produce a smoother performance from the speakers, with a notable improvement on off-axis balance. To aid timing and rhythm, the LX series speakers use Mission’s inverted driver geometry, placing the midrange driver above the tweeter. The wavelengths from the woofers and tweeters coincide at the listener’s head height. For the cabinet of the LX-2 MKII speakers, internal damping has been widely used, to reduce midrange colouration and improve bass response. Using Computer-aided design, the LX-2 MKII speaker cabinets have improved rigidity with less unwanted resonance. The speakers are available in three finishes of matte black, white or walnut. Mission LX-2 MKII Bookshelf Speakers features 5 inch composite bass driver 25mm microfibre dome tweeter Inverted driver geometry Internally damped cabinet for reduced colouration and better bass response white and walnut finishes Product Specifications General description 2-way standmount speaker Enclosure type bass reflex Bass driver 5(130mm) composite fibre Treble driver 25mm microfibre dome Sensitivity (2.83V @ 1m) 87dB Recommended amplifier power 20-100W Peak SPL 103dB Frequency response (+/-3dB) 55Hz ~ 20kHz Dimensions (H x W x D) 305 x 200 x 258mm Weight 6.34kg
Shopee
5.0
(4)
จังหวัดกรุงเทพมหานคร
ลด12%
ลำโพง
:
ร้าน Audiomate.bkk: Mission LX 3D MK II The LX-3D MKII uses a 25mm microfiber dome tweeter to produce crisp and detailed high frequencies, with a neodymium magnet for maximum magnetic force in a small space. The tweeter is lightweight, with impressive transient attack for all the high frequencies. The 4 inch bass driver featured on the LX-3D MKII is a new version of the DiaDrive from Mission, using a seamless curvilinear diaphragm instead of a cone and hub cap. The driver on the LX-3D MKII speakers is constructed from an advanced dual-layer fibre formulation, which exhibits excellent self-damping and has a very high stiffness to mass ratio. A high strength ferrite magnet ensures the magnetic is directed precisely within the voice coil, for an ultra-linear excursion and a focused performance. The bass driver uses comb-tooth separations around the driver to help scatter interfering reflections. This helps the driver produce a smoother frequency response with less resonance. For the MKII version of the LX Series, Mission has updated the crossover to produce a smoother performance from the speakers, with a notable improvement on off-axis balance. To aid timing and rhythm, the LX series speakers use Mission’s inverted driver geometry, placing the midrange driver above the tweeter. The wavelengths from the woofers and tweeters coincide at the listener’s head height. For the cabinet of the LX-3D MKII speakers, internal damping has been widely used, to reduce midrange colouration and improve bass response. Using Computer-aided design, the LX-3D MKII speakers cabinets have improved rigidity with less unwanted resonance. The speakers is available in three finishes of matte black, white or walnut. Mission LX-3D MKII Surround Speakers features Dedicated compact 2-way surround speakers 4 inch composite bass driver 25mm microfibre dome tweeter Internally damped cabinet for reduced colouration and better bass response white and walnut finishes Product Specifications General description 2-way surround speaker Enclosure type closed box system Bass driver 4(100mm) composite fibre Treble driver 25mm microfibre dome Sensitivity (2.83V @ 1m) 89dB Recommended amplifier power 20-80W Peak SPL 199dB Frequency response (+/-3dB) 105Hz ~ 20kHz Dimensions (H x W x D) 158 x 160 x 260mm Weight 2.85kg
Shopee
5.0
(6)
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน effort62: LX-2 MKII Specifications General description2-way bookshelf speaker Enclosure typebass reflex Transducer complement2-way Bass driver5″(130mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)87dB Recommended amplifier power20-100W Peak SPL103dB Nominal impedance8Ω Compatible Minimum impedance3.8Ω Frequency response (+/-3dB)55Hz ~ 20kHz Bass extension(-6dB)50Hz Crossover frequency3.2kHz Cabinet Volume (in litres)8.5L Height (on plinth)305mm Width200mm Depth (with terminals)(250+8)mm Carton size535 x 350 x 400mm Net weight6.34kg/pcs Gross weight14.4kg/ctn FinishWalnut Pearl / Lux White
฿12,500
Shopee
จังหวัดนนทบุรี
ลำโพง
:
ร้าน The Best Picture super audio service: LX-2 MKII Standmount/Surround Speakers The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail. Perfected over hundreds of hours of critical listening by Mission’s lead acoustic designer, Peter Comeau, Mission LX MKII utilises trickle-down innovations from the revered ZX series. Improvements in the famous Mission DiaDrive bass unit offer superior control of the low-frequency diaphragm while a refined high-frequency performance and a re-engineered cabinet bracing system further help create a loudspeaker system that outperforms its price-class. LX-2 MKII Specifications General description2-way bookshelf speaker Enclosure typebass reflex Transducer complement2-way Bass driver5(130mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)87dB Recommended amplifier power20-100W Peak SPL103dB Nominal impedance8Ω Compatible Minimum impedance3.8Ω Frequency response (+/-3dB)55Hz ~ 20kHz Bass extension(-6dB)50Hz Crossover frequency3.2kHz Cabinet Volume (in litres)8.5L Height (on plinth)305mm Width200mm Depth (with terminals)(250+8)mm Carton size535 x 350 x 400mm Net weight6.34kg/pcs Gross weight14.4kg/ctn FinishWalnut Pearl / Lux White
฿11,000
Shopee
จังหวัดนนทบุรี
ลำโพง
:
ร้าน Bliss Sound: ข้อมูลจำเพาะ: ชื่อ: ลำโพงชั้นวางหนังสือ 2 ทาง โมเดล: LX-1 MKII สี: Lux Black / Lux White / Walnut Pearl สี: Lux Black / Lux White / Walnut Pearl วัสดุ: วูฟเฟอร์เส้นใยคอมโพสิต, ไมโครไฟเบอร์โดมทวีตเตอร์ ขนาด (WxHxD): 160x260 x 208 มม. (6.25x10.25x8.2 นิ้ว) น้ำหนัก: 4.13 กก. (9.1 ปอนด์) ต่อลำโพงหนึ่งตัว ประเภทตู้: Bass Reflex การเติมตัวแปลงสัญญาณ: เติมเต็มตัวแปลงสัญญาณ 2 ทาง ตัวขับเสียงเบส: คอมโพสิตไฟเบอร์ 4 นิ้ว (100 มม.) ไดรเวอร์เสียงแหลม: โดมไมโครไฟเบอร์ 1 นิ้ว (25 มม.) ความไว: 86dB (2.83V @ 1m) กำลังไฟที่แนะนำของเครื่องขยายเสียง: 20-80W ยอดสูงสุด SPL: 99dB ความต้านทานที่กำหนด: 8Ω (เข้ากันได้) การตอบสนองความถี่: 58Hz - 20kHz (± 3dB) ความถี่ครอสโอเวอร์: 2.7kHz 2) ความเข้ากันได้: เหมาะอย่างยิ่งสำหรับระบบเพลงสเตอริโอช่องเสียงรอบทิศทางด้านหน้าหรือด้านหลังของโฮมเธียเตอร์และการตรวจสอบเดสก์ท็อปใกล้สนาม ใช้ได้กับเครื่องขยายเสียงหรือเครื่องรับสัญญาณ AV ที่ให้ 20-80W ต่อช่องสัญญาณที่ 8 โอห์ม คุณสมบัติ: เรขาคณิตของไดรเวอร์อินเวอร์กลับด้าน (IDG): คุณสมบัติการออกแบบ IDG แบบคลาสสิกของ Mission ด้านล่างไดรเวอร์เบสเพื่อการจัดตำแหน่งเวลาที่สมบูรณ์แบบและเสียงที่โฟกัสชัดเจน เทคโนโลยีไดรเวอร์ขั้นสูง: ใช้ไดรเวอร์เบสไฟเบอร์คอมโพสิตขนาด 4 นิ้วและทวีตเตอร์โดมไมโครไฟเบอร์ 25 มม. ให้การตอบสนองความถี่ที่ราบรื่นและส่วนขยายระดับต่ำที่ทรงพลังถึง 58Hz นวัตกรรมการลดเสียงทริกเกิล: รวมไดรเวอร์หยักที่ได้มาจากซีรีส์ ZX เรือธงเข้ากับการกระจายแสงสะท้อนที่ไม่ต้องการและลดการบิดเบือน เสร็จสิ้นคุณภาพสูง: มีให้เลือกสามสีที่หรูหราทันสมัย (Lux Black, Lux White, Walnut Pearl) เพื่อให้เข้ากับการตกแต่งบ้าน ตำแหน่งที่หลากหลาย: การออกแบบชั้นวางหนังสือขนาดกะทัดรัดช่วยให้วางบนขาตั้งชั้นวางหนังสือหรือโต๊ะทำงานได้อย่างยืดหยุ่นทำให้เหมาะสำหรับทั้งการตั้งค่าไฮไฟและโรงภาพยนตร์ในบ้าน รายการแพ็คเกจ: 4) ลำโพงชั้นวางหนังสือ LX-1 MKII ขนาด 1 x Mission LX-1 MKII (คู่เดียวหรือคู่ขึ้นอยู่กับการซื้อ) ตะแกรงแม่เหล็กแบบถอดได้ (ต่อลำโพง) 1 x คู่มือผู้ใช้
฿12,583
Shopee
ลด13%
ลำโพง
:
ร้าน Audiomate.bkk: Mission LX-3 MK II The LX-3 MKII uses a 25mm microfiber dome tweeter to produce crisp and detailed high frequencies, with a neodymium magnet for maximum magnetic force in a small space. The tweeter is lightweight, with impressive transient attack for all the high frequencies. The 6.5 inch bass driver featured on the LX-3 MKII is a new version of the DiaDrive from Mission, using a seamless curvilinear diaphragm instead of a cone and hub cap. The driver on the LX-3 MKII speakers is constructed from an advanced dual-layer fibre formulation, which exhibits excellent self-damping and has a very high stiffness to mass ratio. A high strength ferrite magnet ensures the magnetic is directed precisely within the voice coil, for an ultra-linear excursion and a focused performance. The bass driver uses comb-tooth separations around the driver to help scatter interfering reflections. This helps the driver produce a smoother frequency response with less resonance. For the MKII version of the LX Series, Mission has updated the crossover to produce a smoother performance from the speakers, with a notable improvement on off-axis balance. To aid timing and rhythm, the LX series speakers use Mission’s inverted driver geometry, placing the midrange driver above the tweeter. The wavelengths from the woofers and tweeters coincide at the listener’s head height. For the cabinet of the LX-3 MKII speakers, internal damping has been widely used, to reduce midrange colouration and improve bass response. Using Computer-aided design, the LX-3 MKII speaker cabinets have improved rigidity with less unwanted resonance. The speakers are available in three finishes of matte black, white or walnut. Mission LX-3 MKII Bookshelf Speakers features 6.5 inch composite bass driver 25mm microfibre dome tweeter Inverted driver geometry Internally damped cabinet for reduced colouration and better bass response white and walnut finishes Product Specifications General description 2-way standmount speaker Enclosure type bass reflex Bass driver 6.5(165mm) composite fibre Treble driver 25mm microfibre dome Sensitivity (2.83V @ 1m) 88dB Recommended amplifier power 20-120W Peak SPL 105dB Frequency response (+/-3dB) 45Hz ~ 20kHz Dimensions (H x W x D) 345 x 226 x 308mm Weight 8.4kg
Shopee
5.0
(2)
จังหวัดกรุงเทพมหานคร
ลด12%
ลำโพง
:
ร้าน Audiomate.bkk: Mission LX C2 MK II The LX-C2 MKII uses a 25mm microfiber dome tweeter to produce crisp and detailed high frequencies, with a neodymium magnet for maximum magnetic force in a small space. The tweeter is lightweight, with impressive transient attack for all the high frequencies. The two 5 inch bass drivers featured on the LX-C2 MKII are a new version of the DiaDrive from Mission, using a seamless curvilinear diaphragm instead of a cone and hub cap. The drivers on the LX-C2 MKII speaker are constructed from an advanced dual-layer fibre formulation, which exhibits excellent self-damping and has a very high stiffness to mass ratio. A high strength ferrite magnet ensures the magnetic is directed precisely within the voice coil, for an ultra-linear excursion and a focused performance. The bass drivers use comb-tooth separations around the driver to help scatter interfering reflections. This helps the driver produce a smoother frequency response with less resonance. For the MKII version of the LX Series, Mission has updated the crossover to produce a smoother performance from the speaker, with a notable improvement on off-axis balance. To aid timing and rhythm, the LX series speaker use Mission’s inverted driver geometry, placing the midrange driver above the tweeter. The wavelengths from the woofers and tweeters coincide at the listener’s head height. For the cabinet of the LX-C2 MKII speaker, internal damping has been widely used, to reduce midrange colouration and improve bass response. Using Computer-aided design, the LX-C2 MKII speaker cabinets have improved rigidity with less unwanted resonance. The speaker is available in three finishes of matte black, white or walnut. Mission LX-C2 MKII Centre Speaker features Dedicated compact 2-way centre speaker Two 5 inch composite bass drivers 25mm microfibre dome tweeter Internally damped cabinet for reduced colouration and better bass response white and walnut finishes Product Specifications General description 2-way centre speaker Enclosure type bass reflex Bass driver 5(130mm) composite fibre Treble driver 25mm microfibre dome Sensitivity (2.83V @ 1m) 89dB Recommended amplifier power 20-120W Peak SPL 105dB Frequency response (+/-3dB) 65Hz ~ 20kHz Dimensions (H x W x D) 180 x 500 x 238mm Weight 8.8kg
Shopee
5.0
(1)
จังหวัดกรุงเทพมหานคร
ลด12%
ลำโพง
:
ร้าน Audiomate.bkk: Mission LX-4 MKII The LX-4 MKII uses a 25mm microfiber dome tweeter to produce crisp and detailed high frequencies, with a neodymium magnet for maximum magnetic force in a small space. The tweeter is lightweight, with impressive transient attack for all the high frequencies. The two 5 inch bass drivers featured on the LX-4 MKII are a new version of the DiaDrive from Mission, using a seamless curvilinear diaphragm instead of a cone and hub cap. The drivers on the LX-4 MKII speakers are constructed from an advanced dual-layer fibre formulation, which exhibits excellent self-damping and has a very high stiffness to mass ratio. A high strength ferrite magnet ensures the magnetic is directed precisely within the voice coil, for an ultra-linear excursion and a focused performance. The bass drivers use comb-tooth separations around the drivers to help scatter interfering reflections. This helps the drivers produce a smoother frequency response with less resonance. For the MKII version of the LX Series, Mission has updated the crossover to produce a smoother performance from the speakers, with a notable improvement on off-axis balance. To aid timing and rhythm, the LX series speakers use Mission’s inverted driver geometry, placing the midrange driver above the tweeter. The wavelengths from the woofers and tweeters coincide at the listener’s head height. For the cabinet of the LX-4 MKII speakers, internal damping has been widely used, to reduce midrange colouration and improve bass response. Using Computer-aided design, the LX-4 MKII speaker cabinets have improved rigidity with less unwanted resonance. The speakers are available in three finishes of matte black, white or walnut. Mission LX-4 MKII Floorstanding Speakers features Two 5 inch composite bass drivers 25mm microfibre dome tweeter Inverted driver geometry Internally damped cabinet for reduced colouration and better bass response white and walnut finishes Product Specifications General description 2-way floorstanding speaker Enclosure type bass reflex Bass driver 5(130mm) composite fibre x2 Treble driver 25mm microfibre dome Sensitivity (2.83V @ 1m) 89dB Recommended amplifier power 30-120W Peak SPL 105dB Frequency response (+/-3dB) 45Hz ~ 20kHz Dimensions (H x W x D) 920 x 200 x 273mm Weight 15.5kg
Shopee
5.0
(1)
จังหวัดกรุงเทพมหานคร
ลด8%
ลำโพง
:
ร้าน Audiomate.bkk: MISSION 750 Following in the footsteps of the award-laden flagship Mission 770 – which also heralded Mission’s return to UK-based manufacturing – and even more recently, the Mission 700, the all-new Mission 750 brings the award-winning ‘modern-classic’ design to a whole-new price-point and category. ModelMission 750 General descriptionTwo-way standmount Design philosophy and core technology Enclosure typeBass reflex Transducer complement2-way ABR Bass driver5.25 (135mm) mineral loaded polypropylene cone Midrange driver Treble driver1.25 (28mm) Soft Dome Full-range driver AV shieldNo Sensitivity (2.83V @ 1m)86dB Recommended amplifier power25W - 100W Peak power handling Peak SPL103dB Nominal impedance6Ω (Compatible 8Ω) Minimum impedance4.5Ω Frequency response(+/-3dB)48Hz - 20kHz Bass extension(-6dB)42Hz Crossover frequency2.4kHz Cabinet Volume (in litres)12.2L Dimensions (mm) Height (on plinth)355mm Width216mm Depth (with terminals)(270 + 35) mm Carton size565 * 395 * 485 mm Net weight9.0kg / pcs Gross weight19.5kg / ctn FinishWalnut or Black Oak real wood veneer with white bafe finish Standard accessoriesrubber feet
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน Audiomate.bkk: Mission QX-2 Bookshelf Speaker Mission brings its 40 years of audio expertise to an all-new speaker range. The QX range has striking looks and impressive performance - offering amazing value in both hi-fi and AV set-ups. Advanced new designs and extensive, exacting listening tests have evolved a loudspeaker that offers exciting and dramatic performance, no matter what style of music or movies - you prefer. Five core hi-fi models - 2 bookshelf designs and 3 floor standing speakers - are joined in the Mission QX range by a dedicated center speaker, two-way surround speaker and selection of subwoofers. THE DESIGN CONCEPT REVERSE GEOMETRY DRIVEN DESIGN Mission QX series utilizes Mission’s classic IDG (Inverted Driver Geometry) driver format. By positioning the treble unit below the bass/midrange driver, the length of path is equalized so the sound waves coincide at the listener’s head height. This principle improves ‘time alignment’. NEW “RING DOME” TREBLE UNIT New ‘ring dome’ treble unit offers high levels of musical detail with low distortion - the usual dome cavitation effects are completely avoided Dual ring radiator– Mission’s exclusive ‘ring dome’ utilizes a woven, textile material formed in a double ring arrangement. The combination of textile dome and multi-ring surround applied optimum stiffness to the maximum radiating area. Twin rear cavity non-reflecting design back pressure from the diaphragm is vented to a twin rear cavity, reducing resonance and maintaining a wide operating bandwidth. SOUND WOOFERS Bass drivers feature Mission DiaDrive system DiaDrive twin cone design： Backing the curvilinear front cone is a stiff, conical support with increased area of contact with the voice coil for outstanding transient impact. “comb-tooth trim” The drive unit surround and fixing screws are cleverly concealed behind this unique trim design giving a highly technical look to the front face of the speaker. Specification Mission QX-2 Speaker Type Bookshelf Enclose Type Bass reflex enclosure / 2-way speaker Driver 165mm long fibre composite cone Tweeter 38mm Textile Ring Dome dome Sensitivity 88db Amplifier Requirements 25-120W Peak SPL 95dB Impedance 8 Ohms nominal impedance 3.6 Ohms minimum impedance Frequency Response 44Hz - 24kHz Crossover Frequency 2.2kHz Dimension 320 x 220 x 300+10mm Weight 8.5kg
฿24,000
Shopee
จังหวัดกรุงเทพมหานคร
ร้านค้าแนะนำ
ลำโพง
:
ร้าน HD HiFi: The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail. Perfected over hundreds of hours of critical listening by Mission’s lead acoustic designer, Peter Comeau, Mission LX MKII utilises trickle-down innovations from the revered ZX series. Improvements in the famous Mission DiaDrive bass unit offer superior control of the low-frequency diaphragm while a refined high-frequency performance and a re-engineered cabinet bracing system further help create a loudspeaker system that outperforms its price-class. LX-3 MKII Specifications General description2-way bookshelf speaker Enclosure typebass reflex Transducer complement2-way Bass driver6.5(165mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)88dB Recommended amplifier power20-120W Peak SPL 105dB Nominal impedance8Ω Compatible Minimum impedance4.1Ω Frequency response (+/-3dB)45Hz ~ 20kHz Bass extension(-6dB)40Hz Crossover frequency3.2kHz Cabinet Volume (in litres)13.2L Height (on plinth)345mm Width226mm Depth (with terminals)(300+8)mm Carton size590 x 400 x 450mm Net weight8.42kg/pcs Gross weight18.9kg/ctn
฿14,400
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน HD HiFi: The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail. Perfected over hundreds of hours of critical listening by Mission’s lead acoustic designer, Peter Comeau, Mission LX MKII utilises trickle-down innovations from the revered ZX series. Improvements in the famous Mission DiaDrive bass unit offer superior control of the low-frequency diaphragm while a refined high-frequency performance and a re-engineered cabinet bracing system further help create a loudspeaker system that outperforms its price-class. LX-1 MKII Specifications General description 2-way bookshelf speaker Enclosure type Bass reflex Transducer complement 2-way Bass driver 4(100mm) composite fibre Treble driver 25mm microfibre dome AV shield No Sensitivity (2.83V @ 1m) 86dB Recommended amplifier power 20-80w Peak SPL 99dB Nominal impedance 8Ω Compatible Minimum impedance 4.2Ω Frequency response (+/-3dB) 58Hz ~ 20kHz Bass extension(-6dB) 55Hz Crossover frequency 2.7kHz Cabinet Volume (in litres) 5.5L Height (on plinth) 260mm Width 160mm Depth (with terminals) (200+8)mm Carton size 440 x 290 x 345mm Net weight 4.13kg/pcs Gross weight 9.42kg/ctn
฿8,800
Shopee
จังหวัดกรุงเทพมหานคร
ลด11%
ลำโพง
:
ร้าน Audiomate.bkk: MISSION ZX-1 BOOKSHELF / SURROUND The ZX Series is the latest in a long line of distinguished and revered Mission loudspeakers and joins more recent Award-winning products. The ZX series represents the most technologically advanced loudspeakers in the Mission family, with a distinct ID that will complement the finest electronics and décor. Mission ZX incorporates purpose designed bass driver cones, precision engineered motor systems, advanced treble units and more. SPECIFICATIONS General Description 2-way bookshelf speaker Enclosure Type Bass reflex Transducer Complement 2-way Bass Driver 5.25 (130mm) aluminum cone Treble Driver 1.5 (38mm) ring dome Sensitivity (2.0V @ 1m) 88dB Recommended Amplifier Power 25-100W Peak SPL 108dB Nominal Impedance 8 compatible Minimum Impedance 3.5 Frequency Response(+/-3dB) 52Hz ~ 24kHz Frequency Response(+/-3dB) 52Hz ~ 24kHz Bass Extension(-6dB) 46Hz Crossover Frequency 2.6kHz Dimensions (HxWxD) 300 * 240 * (350+12)mm Net Weight 7.6kg/pcs
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน Audiomate.bkk: Mission QX-1 Bookshelf Speaker Mission brings its 40 years of audio expertise to an all-new speaker range. The QX range has striking looks and impressive performance - offering amazing value in both hi-fi and AV set-ups. Advanced new designs and extensive, exacting listening tests have evolved a loudspeaker that offers exciting and dramatic performance, no matter what style of music or movies - you prefer. Five core hi-fi models - 2 bookshelf designs and 3 floor standing speakers - are joined in the Mission QX range by a dedicated center speaker, two-way surround speaker and selection of subwoofers. THE DESIGN CONCEPT REVERSE GEOMETRY DRIVEN DESIGN Mission QX series utilizes Mission’s classic IDG (Inverted Driver Geometry) driver format. By positioning the treble unit below the bass/midrange driver, the length of path is equalized so the sound waves coincide at the listener’s head height. This principle improves ‘time alignment’. NEW “RING DOME” TREBLE UNIT New ‘ring dome’ treble unit offers high levels of musical detail with low distortion - the usual dome cavitation effects are completely avoided Dual ring radiator– Mission’s exclusive ‘ring dome’ utilizes a woven, textile material formed in a double ring arrangement. The combination of textile dome and multi-ring surround applied optimum stiffness to the maximum radiating area. Twin rear cavity non-reflecting design–back pressure from the diaphragm is vented to a twin rear cavity, reducing resonance and maintaining a wide operating bandwidth. SOUND WOOFERS Bass drivers feature Mission DiaDrive system DiaDrive twin cone design Backing the curvilinear front cone is a stiff, conical support with increased area of contact with the voice coil for outstanding transient impact. “comb-tooth trim” The drive unit surround and fixing screws are cleverly concealed behind this unique trim design giving a highly technical look to the front face of the speaker. Specification Speaker Type Bookshelf Enclose Type Bass reflex enclosure / 2-way speaker Driver 135mm long fibre composite cone Tweeter 38mm Textile Ring Dome dome Sensitivity 87db Amplifier Requirements 25-100W Peak SPL 95dB Impedance 8 Ohms nominal impedance 3.9 Ohms minimum impedance Frequency Response 55Hz - 24kHz Crossover Frequency 2.4kHz Dimension 280 x 195 x 250+10mm Weight 6.2kg
฿19,000
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน The Best Picture super audio service: LX-C1 MKII Standmount/Surround Speakers The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail. Perfected over hundreds of hours of critical listening by Mission’s lead acoustic designer, Peter Comeau, Mission LX MKII utilises trickle-down innovations from the revered ZX series. Improvements in the famous Mission DiaDrive bass unit offer superior control of the low-frequency diaphragm while a refined high-frequency performance and a re-engineered cabinet bracing system further help create a loudspeaker system that outperforms its price-class. LX-C1 MKII Specifications General description2-way bookshelf speaker Enclosure typeclosed-box system Transducer complement2-way Bass driver4(100mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)88dB Recommended amplifier power20-100W Peak SPL103dB Nominal impedance8Ω Compatible Minimum impedance4.3Ω Frequency response (+/-3dB)75Hz ~ 20kHz Bass extension(-6dB)70Hz Crossover frequency3.5kHz Cabinet Volume (in litres)7.6L Height (on plinth)160mm Width400mm Depth (with terminals)(200+8)mm Carton size495 x 300 x 255mm Net weight6.1kg/pcs Gross weight7.5kg/ctn FinishWalnut Pearl / Lux White
฿7,700
Shopee
5.0
(1)
จังหวัดนนทบุรี
ลำโพง
:
ร้าน effort62: LX-3D MkII Specifications General description2-way surround speaker Enclosure typeclosed-box system Transducer complement2-way Bass driver4(100mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)86dB Recommended amplifier power20-80W Peak SPL99dB Nominal impedance8Ω Compatible Minimum impedance4.5Ω Frequency response (+/-3dB)105Hz ~ 20kHz Bass extension(-6dB)90Hz Crossover frequency2.8kHz Cabinet Volume (in litres)2.2L Height (on plinth)(150+8)mm Width160mm Depth (with terminals)260mm Carton size365 x 345 x 245mm Net weight2.85kg/pcs Gross weight6.2kg/ctn FinishWalnut Pearl / Lux White /
฿12,500
Shopee
จังหวัดนนทบุรี
ลำโพง
:
ร้าน effort62: LX-3 MKII Specifications General description2-way bookshelf speaker Enclosure typebass reflex Transducer complement2-way Bass driver6.5(165mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)88dB Recommended amplifier power20-120W Peak SPL105dB Nominal impedance8Ω Compatible Minimum impedance4.1Ω Frequency response (+/-3dB)45Hz ~ 20kHz Bass extension(-6dB)40Hz Crossover frequency3.2kHz Cabinet Volume (in litres)13.2L Height (on plinth)345mm Width226mm Depth (with terminals)(300+8)mm Carton size590 x 400 x 450mm Net weight8.42kg/pcs Gross weight18.9kg/ctn FinishWalnut Pearl / Lux White /
฿16,500
Shopee
จังหวัดนนทบุรี
ลด11%
ลำโพง
:
ร้าน Audiomate.bkk: MISSION ZX-C1 The ZX Series is the latest in a long line of distinguished and revered Mission loudspeakers and joins more recent Award-winning products. The ZX series represents the most technologically advanced loudspeakers in the Mission family, with a distinct ID that will complement the finest electronics and décor. Mission ZX incorporates purpose designed bass driver cones, precision engineered motor systems, advanced treble units and more. SPECIFICATIONS General Description 2-way centre speaker Enclosure Type Bass reflex Transducer Complement 2-way Bass Driver 5.25 (130mm) aluminium cone x2 Sensitivity (2.0V @ 1m) 98dB Recommended Amplifier Power 25-150W Peak SPL 109dB Nominal Impedance 8 compatible Minimum Impedance 4.0 Frequency Response(+/-3dB) 48Hz ~ 24kHz Bass Extension(-6dB) 45Hz Crossover Frequency 2.5kHz Dimensions (HxWxD) 180 * 600 * (300+12)mm Net Weight 12.6kg/pcs
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน Audiomate.bkk: MISSION ZX-5 FLOORSTANDING The ZX Series is the latest in a long line of distinguished and revered Mission loudspeakers and joins more recent Award-winning products. The ZX series represents the most technologically advanced loudspeakers in the Mission family, with a distinct ID that will complement the finest electronics and décor. Mission ZX incorporates purpose designed bass driver cones, precision engineered motor systems, advanced treble units and more. SPECIFICATIONS General Description 3-way floorstanding speaker Enclosure Type Bass reflex Transducer Complement 3-way Bass Driver 6.5 (165mm) aluminium cone x2 Midrange Driver 5.25 (130mm) aluminium cone x2 Treble Driver 1.5 (38mm) ring dome Sensitivity (2.0V @ 1m) 91dB Recommended Amplifier Power 30-200W Peak SPL 114dB Nominal Impedance 4 (8 compatible) Minimum Impedance 3.4 Frequency Response(+/-3dB) 36Hz ~ 24kHz Bass Extension(-6dB) 30Hz Crossover Frequency 570Hz,2.5kHz Dimensions (HxWxD) 1155 * 265 * (400+12)mm Net Weight 31.2kg/pcs
฿77,500
Shopee
จังหวัดกรุงเทพมหานคร
ลด11%
ลำโพง
:
ร้าน Audiomate.bkk: MISSION ZX-C2 The ZX Series is the latest in a long line of distinguished and revered Mission loudspeakers and joins more recent Award-winning products. The ZX series represents the most technologically advanced loudspeakers in the Mission family, with a distinct ID that will complement the finest electronics and décor. Mission ZX incorporates purpose designed bass driver cones, precision engineered motor systems, advanced treble units and more. SPECIFICATIONS General Description 2-way centre speaker Enclosure Type Bass reflex Transducer Complement 2.5-way Bass Driver 5.25 (130mm) aluminium cone x4 Treble Driver 1.5 (38mm) ring dome Sensitivity (2.0V @ 1m) 90dB Recommended Amplifier Power 25-150W Peak SPL 110dB Nominal Impedance 8 compatible Minimum Impedance 4.4 Frequency Response(+/-3dB) 48Hz ~ 24kHz Bass Extension(-6dB) 42Hz Crossover Frequency 430Hz, 2.1kHz Dimensions (HxWxD) 180 * 880 * (300+12)mm Net Weight 17.6kg/pcs
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน Taan Fortune Town: LX-3D MkII Specifications General description2-way surround speaker Enclosure typeclosed-box system Transducer complement2-way Bass driver4″(100mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)86dB Recommended amplifier power20-80W Peak SPL99dB Nominal impedance8Ω Compatible Minimum impedance4.5Ω Frequency response (+/-3dB)105Hz ~ 20kHz Bass extension(-6dB)90Hz Crossover frequency2.8kHz Cabinet Volume (in litres)2.2L Height (on plinth)(150+8)mm Width160mm Depth (with terminals)260mm Carton size365 x 345 x 245mm Net weight2.85kg/pcs Gross weight6.2kg/ctn FinishWalnut Pearl
฿11,000
Shopee
จังหวัดกรุงเทพมหานคร
ลำโพง
:
ร้าน The Best Picture super audio service: LX-6 MKII Standmount/Surround Speakers The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail. Perfected over hundreds of hours of critical listening by Mission’s lead acoustic designer, Peter Comeau, Mission LX MKII utilises trickle-down innovations from the revered ZX series. Improvements in the famous Mission DiaDrive bass unit offer superior control of the low-frequency diaphragm while a refined high-frequency performance and a re-engineered cabinet bracing system further help create a loudspeaker system that outperforms its price-class. LX-6 MKII Specifications General description3-way floorstanding speaker Enclosure typebass reflex Bass driver6.5(165mm) composite fibre x2 Midrange driver5(130mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)91dB Recommended amplifier power30-200W Peak SPL107dB Nominal impedance8Ω Compatible Minimum impedance3.0Ω Frequency response (+/-3dB)35Hz ~ 20kHz Bass extension(-6dB)30Hz Crossover frequency400Hz,3.3kHz Cabinet Volume (in litres)3.2L/72.5L Height (on plinth)(1000+20)mm Width226mm Depth (with terminals)(325+8)mm Carton size445 x 340 x 1115mm Net weight21.9kg/pcs Gross weight24.7kg/ctn FinishWalnut Pearl / Lux White
฿36,600
Shopee
จังหวัดนนทบุรี
ลด21%
ชุดเครื่องเสียง
:
ร้าน HD HiFi
LAZADA
ขายเเล้ว 1
ในประเทศ
ลำโพง
:
ร้าน HD HiFi: The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail. Perfected over hundreds of hours of critical listening by Mission’s lead acoustic designer, Peter Comeau, Mission LX MKII utilises trickle-down innovations from the revered ZX series. Improvements in the famous Mission DiaDrive bass unit offer superior control of the low-frequency diaphragm while a refined high-frequency performance and a re-engineered cabinet bracing system further help create a loudspeaker system that outperforms its price-class. LX-C1 MKII Specifications General description2-way bookshelf speaker Enclosure typeclosed-box system Transducer complement2-way Bass driver4(100mm) composite fibre Treble driver25mm microfibre dome AV shieldNo Sensitivity (2.83V @ 1m)88dB Recommended amplifier power20-100W Peak SPL103dB Nominal impedance8Ω Compatible Minimum impedance4.3Ω Frequency response (+/-3dB)75Hz ~ 20kHz Bass extension(-6dB)70Hz Crossover frequency3.5kHz Cabinet Volume (in litres)7.6L Height (on plinth)160mm Width400mm Depth (with terminals)(200+8)mm Carton size495 x 300 x 255mm Net weight6.1kg/pcs Gross weight7.5kg/ctn
฿7,700
Shopee
จังหวัดกรุงเทพมหานคร
ตัวกรองสินค้า
หมวดหมู่
ลำโพง
(5)
ประเภทลำโพง
ลำโพงบุ๊คเชลฟ์
(1)
