เสร็จสิ้น จัดเรียงตาม
อุปกรณ์ไฟฟ้า
:
ร้าน Hitech electronics
฿17
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน ACC IT
฿34
5.0
(3)
ขายเเล้ว 3
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน Karin Bot32
฿36
5.0
(6)
ขายเเล้ว 5
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน Karin Bot32
฿25
5.0
(6)
ขายเเล้ว 3
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน Karin Bot32
5.0
(60)
ขายเเล้ว 2
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน Karin Bot32
฿19
5.0
(30)
ขายเเล้ว 10
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน Karin Bot32
฿30
5.0
(9)
ขายเเล้ว 4
ในประเทศ
มาปุ้บ บอกปั้บ กับ
Priceza Rewards
มาปุ้บ บอกปั้บ กับ
Priceza Rewards
อุปกรณ์ไฟฟ้า
:
ร้าน KPRAppCompile
5.0
(287)
ขายเเล้ว 2
ในประเทศ
ร้านค้าแนะนำ
เครื่องมือช่าง
:
ร้าน N_I_T: HC-SR04 Ultrasonic Sensor Module เซนเซอร์วัดระยะทางแบบ Ultrasonic
฿49
จังหวัดกรุงเทพมหานคร
ร้านค้าแนะนำ
เครื่องมือช่าง
:
ร้าน Di Shop: HC-SR04 Ultrasonic Sensor Module เซนเซอร์วัดระยะทางแบบ Ultrasonic
฿49
5.0
(2)
จังหวัดกรุงเทพมหานคร
อุปกรณ์ไฟฟ้า
:
ร้าน Zerobike Shop
4.9
(181)
ขายเเล้ว 3
ในประเทศ
ร้านค้าแนะนำ
ผลิตภัณฑ์ปรับอากาศ
:
ร้าน AC HardKits: รายละเอียด เซนเซอร์ Ultrasonic Module HC-SR04 Module main technical parameters: 1.Working Voltage : 5V(DC) 2.Static current: Less than 2mA. 3.Output signal: Electric frequency signal, high level 5V, low level 0V. 4.Sensor angle: Not more than 15 degrees. 5.Detection distance: 2cm-450cm. 6.High precision: Up to 0.3cm 7.Input trigger signal: 10us TTL impulse 8.Echo signal : output TTL PWL signal Mode of connection: 1.VCC 2.trig(T) 3.echo(R) 4.GND Use method: Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is used as a switching output when anti-theft module, and without the feet when ranging modules. Note : the module should be inserted in the circuit before been power, which avoid producing high level of misoperation;if not, then power again. Module Working Principle: 1.Adopt IO trigger through supplying at least 10us sequence of high level signal. 2.The module automatically send eight 40khz square wave and automatically detect whether receive the returning pulse signal. 3.If there is signals returning, through outputting high level and the time of high level continuing is the time of that from the ultrasonic transmitting to receiving. Test distance = (high level time * sound velocity (340M/S) / 2. Note : This module is not suitable to connect with electric power, if you need to connect this module with electronic power,then let the GND terminal of this module to be connected first,otherwise, it will affect the normal work of the module ดาวน์โหลด library hc sr04 ที่นี่ Code ตัวอย่างการใช้งาน ศึกษาเพิ่มเติมได้ที่นี่ - /* - * Ultrasonic Sensor HC-SR04 and Tutorial - * - * by Dejan Nedelkovski, - * www.HowToMechatronics.com - * - */ - - // defines pins numbers - const int trigPin = 9; - const int echoPin = 10; - - // defines variables - long duration; - int distance; - - void setup() { - pinMode(trigPin, OUTPUT); // Sets the trigPin as an Output - pinMode(echoPin, INPUT); // Sets the echoPin as an Input - Serial.begin(9600); // Starts the serial communication - } - - void loop() { - // Clears the trigPin - digitalWrite(trigPin, LOW); - delayMicroseconds(2); - - // Sets the trigPin on HIGH state for 10 micro seconds - digitalWrite(trigPin, HIGH); - delayMicroseconds(10); - digitalWrite(trigPin, LOW); - - // Reads the echoPin, returns the sound wave travel time in microseconds - duration = pulseIn(echoPin, HIGH); - - // Calculating the distance - distance= duration*0.034/2; - - // Prints the distance on the Serial Monitor - Serial.print(Distance: ); - Serial.println(distance); - } ***รายละเอียดและเงื่อนไขการรับประกัน*** ✅ - ร้านเราจัดส่งสินค้าทุกวันจันทร์-เสาร์ ✅ - หากลูกค้ากดสั่งซื้อผ่านระบบได้สำเร็จ แสดงว่ามีสินค้าพร้อมจัดส่งได้ทันที ✅ - สต๊อกสินค้าอยู่ในประเทศไทย ส่งถึงมือลูกค้าภายใน 1-3 วัน รวดเร็วทันใจแน่นอน ✅ - หากลูกค้าต้องการบิลใบเสร็จ ให้แจ้งที่หมายเหตุถึงร้านค้าหรือแชทแจ้งทางร้านได้เลย *** เงื่อนไขการรับประกัน*** ✅ - หากลูกค้าได้รับสินค้าผิด ชำรุด ให้ถ่ายรูปสินค้าที่ได้รับส่งมาทางแชท แจ้งปัญหาได้ ทางร้านยินดีเปลี่ยนสินค้า/คืนเงิน ✅ - ทางร้านรับประกันสินค้า 1 เดือน หากสินค้ามีปัญหาแจ้งมาทางแชทได้เลย สินค้าจะต้องอยู่ในสภาพที่สมบูรณ์ไม่ถูกงัดแงะ ถูกบัดกรี หรือเสียหายจากลูกค้าเป็นผู้กระทำ ✅ - กรณีคืนสินค้าที่มีปัญหา ลูกค้าทำเรื่องคืนสินค้ามายังร้าน เมื่อร้านค้าได้รับสินค้าคืนจะดำเนินการตรวจสอบสินค้าและคืนเงินให้ทันที ✅ - หากเกินระยะเวลารับประกัน ทางร้านจะไม่รับชอบใดๆทั้งสิ้น ฯลฯ
฿38
4.9
(45)
ขายเเล้ว 2
จังหวัดชลบุรี
อุปกรณ์ไฟฟ้า
:
ร้าน โอ.อาร์. เทคโนโลยี
4.9
(52)
ขายเเล้ว 1
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน โอ.อาร์. เทคโนโลยี
4.9
(52)
ขายเเล้ว 1
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน โอ.อาร์. เทคโนโลยี
4.9
(52)
ขายเเล้ว 4
ในประเทศ
เครื่องมือช่าง
:
ร้าน genlogic: HC-SR04 Ultrasonic Sensor Module 3.3-5V เซนเซอร์วัดระยะทางแบบ Ultrasonic HC-SR04 เป็นโมดูลสำหรับวัดระยะทางด้วยคลื่นเสียงอัลตร้าโซนิค ระยะที่สามารถวัดได้ตั้งแต่ 2cm ถึง 400cm รองรับแรงดันไฟ 3.3-5V ใช้งานง่าย ราคาถูก มีไลบรารี่สำหรับต่อกับ Arduino ได้โดยตรง เพื่อแสดงระยะทางได้ทันที ดาวห์โหลดไลบราลี่ HC-SR04 Ultrasonic Sensor สำหรับเชื่อมต่อกับ Arduino ได้ที่นี่ ข้อมูลเพิ่มเติม HC-SR04 Ultrasonic Sensor Module The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object like bats or dolphins do. It offers excellent non-contact range detection with high accuracy and stable readings in an easy-to-use package. From 2cm to 400 cm or 1 to 13 feet. It operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). It comes complete with ultrasonic transmitter and receiver module. คุณสมบัติเซนเซอร์วัดระยะทาง HC-SR04 Ultrasonic Sensor Module: - Power Supply : 3.3-5V DC - Quiescent Current : 2mA - Working Currnt: 15mA - Effectual Angle: 15 - Ranging Distance : 2cm 400 cm/1 - 13ft - Resolution : 0.3 cm - Measuring Angle: 30 degree - Trigger Input Pulse width: 10uS - Dimension: 45mm x 20mm x 15mm ตัวอย่างวิธีการต่อ HC-SR04 Ultrasonic Module เข้ากับ Arduino Unoตัวอย่างโค้ต HC-SR04 const int pingPin = 13; 2 int inPin = 12; 3 4 5 void setup() { 6 Serial.begin(9600); 7 } 8 9 void loop() 10 { 11 long duration, cm; 12 13 pinMode(pingPin, OUTPUT); 14 15 16 digitalWrite(pingPin, LOW); 17 delayMicroseconds(2); 18 digitalWrite(pingPin, HIGH); 19 delayMicroseconds(5); 20 digitalWrite(pingPin, LOW); 21 pinMode(inPin, INPUT); 22 duration = pulseIn(inPin, HIGH); 23 24 cm = microsecondsToCentimeters(duration); 25 26 Serial.print(cm); 27 Serial.print(cm); 28 Serial.println(); 29 delay(100); 30 } 31 32 long microsecondsToCentimeters(long microseconds) 33 { 34 // The speed of sound is 340 m/s or 29 microseconds per centimeter. 35 // The ping travels out and back, so to find the distance of the 36 // object we take half of the distance travelled. 37 return microseconds / 29 / 2; 38 }
฿50
5.0
(6)
จังหวัดกรุงเทพมหานคร
เซนเซอร์วัดระยะทางด้วยเสียงอัลตร้าโซนิค HC SR04 HC SR04P Ultrasonic Sensor Module มีสินค้าในไทย พร้อมส่งทันที ไม่ต้องรอนาน สินค้าดี มีคุณภาพ สินค้าของเราบัดกรีให้แล้ว พร้อมนำไปต่อใช้งานได้ทันที เซนเซอร์วัดระยะทางด้วยเสียงอัลตร้าโซนิค รุ่น HC SR04P ใช้งานได้ระยะไกลถึง 4 เมตร ใช้ได้กับแรงดันไฟ 3V 5 5V สินค้าใช้ได้กับ Arduino Library ทำให้ง่ายและประหยัดเวลาในการเขียนโค้ด ใช้ได้กับ Arduino Nodemcu ESP32 ESP8266 WeMos D1 STM32 Micro Bit Raspberry Pi และไมโครคอนโทรเลอร์อื่นๆ Description HC SR04 HC SR0
฿15
อื่นๆในหมวด Printer
:
ร้าน CHUY DIY: โมดุล เซนเซอร์สำหรับ Arduino Ultrasonic ranging module HC-SR04 1. แรงดันไฟฟ้าที่ใช้งานได้: 5V (DC) 2. กระแสคงที่: น้อยกว่า 2mA. 3. สัญญาณเอาต์พุต: สัญญาณความถี่ไฟฟ้าระดับสูง 5V ระดับต่ำ 0V 4. มุมเซนเซอร์: ไม่เกิน 15 องศา 5. ระยะตรวจจับ: 2 ซม. - 400 ซม. 6. ความแม่นยำสูง: สูงถึง 0.3 ซม 7. สัญญาณทริกเกอร์อินพุต: แรงกระตุ้น TTL 10us 8. สัญญาณสะท้อน: เอาต์พุตสัญญาณ TTL PWL โหมดการเชื่อมต่อ: 1. วีซีซี 2. ทริก (T) 3. อีโช (R) 4. GND
฿35
จังหวัดนครนายก
เซนเซอร์ Ultrasonic ใช้เสียงสะท้อนกลับในการคำนวณวัดระยะทาง แม่นยำที่ 2 - 400 cm ใช้ง่ายมีไลบารีมาตรฐานพร้อมใช้งาน เซนเซอร์ Ultrasonic Module HC-SR04 Module main technical parameters:1.Working Voltage : 5V(DC)2.Static current: Less than 2mA.3.Output signal: Electric frequency signal, high level 5V, low level 0V.4.Sensor angle: Not more than 15 degrees.5.Detection distance: 2cm-450cm.6.High precision: Up to 0.3cm 7.Input trigger signal: 10us TTL impulse8.Echo signal : output TTL PWL signalMode of
฿60
อุปกรณ์โรงงาน
:
฿45
ร้านค้าทางการ
อุปกรณ์ไฟฟ้า
:
ร้าน Diymore Official Storeใน ShopeeMall : Feature: 1.This module performance is stable, measure the distance accurately. performance nearly the same as SRF05, SRF02 SRF05, SRF02 ultrasonic distance measuring module and other comparable. Module High precision, blind spots (2cm) super close. 2.Main technical parameters: Voltage: DC 5V Static current: less than 2mA Electrical level output: 5V high Electrical level output: at the end of 0V Induction angle: not more than 15 degrees Detection distance: 2cm-450cm High precision: 2mm Wiring: VCC, trig (control side), echo (receiving end), GND 3.Module works: using IO trigger distance, the high signal to at least 10us module automatically sends eight 40khz square wave, automatically detects whether a signal return; a signal back, through the IO output a high electrical level, high electrical level duration is: the ultrasound time from launch to return. Test distance = (time of the high electrical level * speed of sound (340M / S)) / 2; Package Included: 1pc x Ultrasonic Sensor Module HC-SR04 Distance Measuring Sensor For FOR arduino
4.8
(19)
ประเทศจีน
อุปกรณ์ไฟฟ้า
:
ร้าน iT.in.Store
฿37
5.0
(3)
ขายเเล้ว 1
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน iT.in.Store
฿118
5.0
(1)
ในประเทศ
อุปกรณ์ไฟฟ้า
:
ร้าน tenstarrobot.th: เซ็นเซอร์อัลตราโซนิก HC-SR04 HC SR 04 HCSR04 Ultrasound Range Finder ระยะการวัดโมดูลการวัด Arduino Robotics โมดูลนี้มีเสถียรภาพและระยะการวัดที่แม่นยำ โมดูลความแม่นยำสูงโมดูลตาบอด (2 ซม.) ใกล้เคียงเป็นพิเศษช่วงที่มั่นคงเป็นความสำเร็จของผลิตภัณฑ์นี้สู่ตลาดอย่างมาก! โมดูลป้องกันการโจรกรรม GH-311 ที่มีความถ่อมตนอย่างเต็มที่โมดูลป้องกันการโจรกรรม GH-311 การใช้ IO ทริกเกอร์ตั้งแต่ IO จนถึงอย่างน้อย 10us ของสัญญาณระดับสูง โมดูลจะส่งคลื่นสี่เหลี่ยม 40khz แปดคลื่นโดยอัตโนมัติตรวจจับว่ามีการส่งคืนสัญญาณโดยอัตโนมัติหรือไม่ (3) มีการส่งสัญญาณกลับผ่านเอาต์พุต IO ที่สูงระยะเวลาสูงและสูงคือเวลานับตั้งแต่เปิดตัวจนถึงการกลับมาของอัลตราซาวนด์ ระยะการทดสอบ = (เวลาสูง * ความเร็วเสียง (340M / S)) / 2; ผลิตภัณฑ์นี้ใช้งานง่ายปากควบคุมที่ทำจาก 10US เหนือระดับสูงคุณสามารถรอการรับสัญญาณเอาต์พุตระดับสูงได้ เวลานี้สามารถคำนวณได้จากระยะทาง เอาต์พุตสามารถเปิดได้เมื่อปากต่ำเมื่อคุณสามารถอ่านค่าของตัวจับเวลาได้ เวลานี้สามารถคำนวณได้จากระยะทาง วงจรการวัดอย่างต่อเนื่องดังกล่าวคุณสามารถย้ายค่าที่วัดได้อย่างต่อเนื่อง คุณสมบัติโมดูล: แรงดันไฟฟ้าที่ใช้งานได้: DC5V 2: กระแสไฟฟ้าดับ: น้อยกว่า 2mA 3: เอาต์พุตระดับ: สูง 5V 4: เอาต์พุตระดับ: เอาต์พุตระดับ: 0V ด้านล่าง 5: มุมตรวจจับ: ไม่เกิน 15 องศา 6: ช่วงการตรวจจับ: 2 ซม. - 450 ซม 7: ความแม่นยำสูง: สูงสุด 0.3 ซม แรงดันไฟฟ้า: 3.3-5V 45.1 มม. * 14.5 มม. ขนาด: 45.1 มม. * 20 มม. * 14.5 มม น้ำหนัก: 8 กรัม
฿8.00
5.0
(36)
ประเทศจีน
ตัวกรองสินค้า
หมวดหมู่
อุปกรณ์ไฟฟ้า
(12)
เครื่องมือช่าง
(3)
อื่นๆในหมวด Printer
(1)
อุปกรณ์โรงงาน
(1)
ผลิตภัณฑ์ปรับอากาศ
(1)
ไม่ระบุ
(2)