อัพเดตล่าสุด : 23 กันยายน 2569 | สินค้าทั้งหมด : 44 รายการ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿79,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿84,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿150,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿158,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿81,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿128,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿177,900
LAZADA
LENNSHOP
ในประเทศ

มาปุ้บ บอกปั้บ กับ
Priceza Rewards

pz--noti

มาปุ้บ บอกปั้บ กับ
Priceza Rewards

คุณอาจพลาดของรางวัลมีจำกัด เพราะเราไม่อยากให้คุณพลาดของรางวัลดีๆ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿186,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน LENNSHOP
฿134,900
LAZADA
LENNSHOP
ในประเทศ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-NR5100 สเปค AMPLIFIER Power output (All channels)         165 W/Ch (6 ohms, 1 kHz, 10% THD, 1-ch driven) 80 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC) Dynamic power 160W (3 ohms, Front) 125W (4 ohms, Front) 85W (8 ohms, Front) THD+N (Total Harmonic Distortion + Noise)           0.08% (20 Hz–20 kHz) Input sensitivity and impedance 200mVrms/32k-ohms (Line) Rated RCA output level and impedance   1Vrms 200m Vrms/2.2k-ohms(Zone B PreLine-out) Frequency response        10 Hz–100 kHz/+1 dB, -3 dB (Direct/Pure Audio) Tone control        ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-noise ratio        106 dB (Line, IHF-A) Speaker impedance         4–16 ohms TUNER FM         87.5 MHz–107.9 MHz AM         530 kHz–1,710 kHz FM/AM preset memory  40 stations GENERAL Power supply      AC 120 V~, 60 Hz Power consumption (operating)  490 W Power consumption (idle)             45 W Power consumption (standby)     0.1 W Dimensions (W x H x D)  17 1/8˝ x 6 5/16˝ x 12 15/16˝ (435 x 160 x 328 mm) Weight  18.5 lbs. (8.4 kg)   Klipsch R-50M SPECIFICATIONS : FREQUENCY RESPONSE : 58Hz - 21kHz +/- 3dB SENSITIVITY : 92 dB (In-Room) POWER HANDLING (CONT/PEAK) : 75W/300W NOMINAL IMPEDANCE : 8 ohms Compatible CROSSOVER FREQUENCY : 1,560 Hz HIGH FREQUENCY DRIVER : 1 Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER : Single 5.25 spun-copper TCP woofer ENCLOSURE MATERIAL : MDF ENCLOSURE TYPE : Bass-Reflex via rear-firing ports INPUTS : Single Gold Plated Binding Posts HEIGHT INCHES (MM) : 13.9 (354 mm) WIDTH INCHES (MM) : 7 (178 mm) DEPTH INCHES (MM) : 9 (229 mm) PRODUCT WEIGHT LBS (KG) : 11 lbs (5 kg) FINISH : Black Textured Wood Grain Viny   Klipsch R-50C Speaker System Speaker Configuration 2-Way Power Handling           100 W RMS 400 W Peak Drivers 1 x 1 / 25.4 mm Aluminum Tweeter (Front-Firing) 2 x 5.25 / 133.35 mm Woofer (Front-Firing) Passive Radiators        No Enclosure Type Sealed Frequency Response   90 Hz to 21 kHz (±3 dB) Impedance      8 Ohms Wired I/O         1 x Binding Post Pair Crossover        1650 Hz Sensitivity        96 dB Physical Placement & Mounting Options           Tabletop/Bookshelf Cabinet Material          MDF, Vinyl Dimensions     18.7 x 7 x 8.2 / 476 x 178 x 208 mm Weight 13.9 lb / 6.3 kg Packaging Info Package Weight          16.335 lb Box Dimensions (LxWxH)        23.2 x 11.6 x 11.2     Klipsch R-120SW Subwoofer Subwoofer Type Active Enclosure Type   Bass-Reflex Amplifier Power Rating   200 W RMS 400 W Peak Drivers  1 x 12 / 30.5 cm Copper-Spun Graphite (Front-Firing) Frequency Response        29 to 120 Hz Inputs/Outputs   1 x RCA Input (LFE) Maximum SPL    116 dB Phase Adjustment            0 / 180° Power AC Input Power  100 to 240 VAC, 50 / 60 Hz Physical Cabinet Material               MDF Dimensions         14 x 16.5 x 19.2 / 356 x 419 x 488 mm Weight  31.0 lb / 14.1 kg Packaging Info Package Weight 40 lb Box Dimensions (LxWxH)              24 x 21.5 x 18.75  
฿81,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-SR494 Product highlights: Power and processing: 7-channel amplifier 80 watts per channel into 8 ohms (20-20,000 Hz) at .08% THD, with 2 channels driven Dolby® and DTS® surround sound decoding Dolby Atmos® processing for use with in-ceiling or height speakers for more enveloping surround sound DTS:X™ for an immersive, 3-dimensional soundstage AccuEQ Advance speaker calibration optimizes your system's sound for your room (microphone included) built-in Bluetooth for wireless music streaming from a compatible phone, tablet, or computer powered stereo audio output for Zone B using Zone B allows 5.2-channel playback in your main room Audio performance features: high-current amplifier design 32-bit/384kHz digital-to-analog converter for clear sound from digital sources Music Optimizer function enhances the sound quality of compressed music files and Bluetooth streams bi-amp capability with compatible front speakers by reassigning surround back channels Connections: HDMI audio/video switching: 4 in, 1 out HDCP 2.2 technology ensures compatibility with 4K Ultra HD sources and TVs(HDCP 2.3-compatible with free future firmware update) HDR-compatible for extended picture contrast and brightness with compatible 4K TVs and HDR-encoded content supports HDR10, Dolby Vision™, and HLG digital audio inputs: 1 optical and 1 coaxial 3 analog stereo audio inputs zone B stereo line-level outputs preamp outputs for 2 powered subwoofers rear-panel USB port for powering an external device (does not support music playback) outputs for 7 speakers (Front L/R, Center, Surround L/R, Height L/R) General features: 4K/60p and 3D video pass-through HDMI standby pass-through allows access to all HDMI connected devices without having to power on the receiver 40 AM/FM presets remote control 17-1/8W x 6-5/16H x 12-15/16D weight: 18.1 lbs. warranty: 2 years   Klipsch R-610F FREQUENCY RESPONSE 45Hz - 21kHz +/- 3dB SENSITIVITY 94 dB @ 2.83V/1M POWER HANDLING (CONT/PEAK) 85W/340W NOMINAL IMPEDANCE 8 Ohms Compatible CROSSOVER FREQUENCY 1,800 Hz HIGH FREQUENCY DRIVER 1” Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER Single 6.5” spun-copper IMG woofer ENCLOSURE MATERIAL MDF ENCLOSURE TYPE             Bass-Reflex via rear-firing Tractrix® ports INPUTS Single Gold Plated Binding Posts HEIGHT 37” (940 mm) WIDTH 9.4” (240 mm) DEPTH 15.1” (384 mm) WEIGHT 36 lbs (16.3 kg) FINISH Black Textured Wood Grain Vinyl INCLUDED ACCESSORIES               Rubber Feet (4)   Klipsch R-52C klipsch R-52C ลำโพง Center ขนาด 2×5.25 นิ้ว 400 วัตต์ Get crystal-clear sound for your movie dialogue and music lyrics with the incredible acoustics from the R-52C center channel speaker. Our proprietary Tractrix® horn-loaded technology gives you a lifelike, front-row listening experience unlike any other.   Features: 1″ Aluminum LTS tweeter 90×90 Square Tractrix Horn Dual 5.25″ Spun-Copper IMG Woofers Strong, Flexible Removable Magnetic Grille Closed Back Design for Flexible Placement Dimensions: 7.3″ x 18.75″ x 7.6″   SPECIFICATIONS FREQUENCY RESPONSE  89Hz – 21kHz +/- 3dB SENSITIVITY        95 dB @ 2.83V/1M POWER HANDLING (CONT/PEAK)              100W/400W NOMINAL IMPEDANCE   8 ohms Compatible CROSSOVER FREQUENCY              1,630 Hz HIGH FREQUENCY DRIVER            1” Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER             Dual 5.25” spun-copper IMG woofers ENCLOSURE MATERIAL   MDF ENCLOSURE TYPE             Sealed INPUTS Single Gold Plated Binding Posts HEIGHT INCHES (MM)     7.3” (185 mm) WIDTH INCHES (MM)      18.75” (476 mm) DEPTH INCHES (MM)       7.6” (194 mm) FINISHES              Black Textured Wood Grain Vinyl INCLUDED ACCESSORIES               Rubber Feet (4) BUILT FROM       2018   Klipsch R-41M Klipsch R-41M ลำโพง ขนาด 4 นิ้ว 200 วัตต์ BOOKSHELF SPEAKER The R-41M bookshelf speakers offer maximum versatility without sacrificing performance from a small, yet elegant audio solution. Designed as main speakers for a compact living space or surround sound to support a Reference speaker system, the R-41M bookshelf speakers are the ideal choice for your home theater system. Features: 1″ Aluminum LTS tweeters 90×90 Square Tractrix Horns 4″ Spun-Copper IMG Woofers Bass-Reflex via Rear-Firing Port Strong, Flexible Removable Magnetic Grille Dimensions: 11.3″ x 5.75″ x 7.9″   SPECIFICATIONS FREQUENCY RESPONSE 68Hz – 21kHz +/- 3dB SENSITIVITY 90 dB @ 2.83V/1M POWER HANDLING (CONT/PEAK) 50W/200W NOMINAL IMPEDANCE 8 ohms Compatible CROSSOVER FREQUENCY 1,730 Hz HIGH FREQUENCY DRIVER 1” Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER Single 4” spun-copper IMG woofer ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass-Reflex via rear-fring ports INPUTS Single Gold Plated Binding Posts HEIGHT INCHES (MM) 11.3” (287 mm) WIDTH INCHES (MM) 5.75” (146 mm) DEPTH INCHES (MM) 7.9” (200 mm) PRODUCT WEIGHT LBS (KG) 7 lbs (3.2 kg) FINISHES Black Textured Wood Grain Vinyl INCLUDE
฿70,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-NR5100 Tuner Section Tuner Type          AM, FM Number of Tuner Presets              40 Stations Radio Frequencies            AM: 530 to 1710 kHz FM: 87.5 to 107.9 MHz Power AC Input Power  120 VAC, 60 Hz Power Consumption         Active: 490 W No Sound: 45 W Standby: 0.1 W Physical Dimensions (W x H x D)  17.1 x 6.3 x 12.9 / 435.0 x 160.0 x 328.0 mm Weight  18.5 lb / 8.4 kg Packaging Info Package Weight 21.94 lb Box Dimensions (LxWxH)              20.7 x 16.4 x 9.4   Klipsch R-40SA Speaker System Speaker Configuration     2-Way Power Handling  50 W RMS 100 W Peak Drivers  1 x 1 / 25.4 mm Aluminum Tweeter (per Speaker) 1 x 4 / 101.6 mm Woofer (per Speaker) Passive Radiators              No Impedance          8 Ohms Wired I/O            1 x Binding Post Pair Crossover            4400 Hz Physical Placement & Mounting Options  Speaker Topper Cabinet Material               MDF, Vinyl Dimensions         5.7 x 7 x 11.7 / 146 x 178 x 298 mm Weight  6.2 lb / 2.8 kg Packaging Info Package Weight 14.635 lb Box Dimensions (LxWxH)              15.2 x 14.8 x 10   Klipsch R-30C Specifications Frequency Response        78 Hz - 21 kHz +/- 3 dB Sensitivity            96 dB (In-Room) at 1 m, Half-Space Anechoic with 2.83 V Input Power Handling (Continuous / Peak)        100 W / 400 W Nominal Impedance        8 Ohms Compatible Crossover Frequency       1,650 Hz High Frequency Driver    1” Aluminium LTS Tweeter Mated to a 90 x 90 Square Tractrix® Horn Low Frequency Driver     Quad 3.5 Spun-Copper TCP Woofers Enclosure Material           MDF Enclosure Type   Bass-Reflex via Forward-Firing Tractrix® Ports Inputs    Single Gold Plated Binding Posts Height   126 mm (5”) Width    660 mm (26”) Depth    173 mm (6.8”) Weight (Each)     5.9 kg (13 lb) Finish     Black Textured Wood Grain Vinyl   Klipsch R-100SW Subwoofer Subwoofer Type Active Enclosure Type   Bass-Reflex Amplifier Power Rating   150 W RMS 300 W Peak Drivers  1 x 10 / 25.4 cm Copper-Spun Graphite (Front-Firing) Frequency Response        32 to 120 Hz Inputs/Outputs   1 x RCA Input (LFE) Maximum SPL    112 dB Phase Adjustment            0 / 180° Power AC Input Power  100 to 240 VAC, 50 / 60 Hz Physical Cabinet Material               MDF Dimensions         12.5 x 14.5 x 16.4 / 318 x 368 x 417 mm Weight  24.0 lb / 10.9 kg Packaging Info Package Weight 31.85 lb Box Dimensions (LxWxH)              21 x 19.7 x 17.2
฿102,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-SR494 Product highlights: Power and processing: 7-channel amplifier 80 watts per channel into 8 ohms (20-20,000 Hz) at .08% THD, with 2 channels driven Dolby® and DTS® surround sound decoding Dolby Atmos® processing for use with in-ceiling or height speakers for more enveloping surround sound DTS:X™ for an immersive, 3-dimensional soundstage AccuEQ Advance speaker calibration optimizes your system's sound for your room (microphone included) built-in Bluetooth for wireless music streaming from a compatible phone, tablet, or computer powered stereo audio output for Zone B using Zone B allows 5.2-channel playback in your main room Audio performance features: high-current amplifier design 32-bit/384kHz digital-to-analog converter for clear sound from digital sources Music Optimizer function enhances the sound quality of compressed music files and Bluetooth streams bi-amp capability with compatible front speakers by reassigning surround back channels Connections: HDMI audio/video switching: 4 in, 1 out HDCP 2.2 technology ensures compatibility with 4K Ultra HD sources and TVs(HDCP 2.3-compatible with free future firmware update) HDR-compatible for extended picture contrast and brightness with compatible 4K TVs and HDR-encoded content supports HDR10, Dolby Vision™, and HLG digital audio inputs: 1 optical and 1 coaxial 3 analog stereo audio inputs zone B stereo line-level outputs preamp outputs for 2 powered subwoofers rear-panel USB port for powering an external device (does not support music playback) outputs for 7 speakers (Front L/R, Center, Surround L/R, Height L/R) General features: 4K/60p and 3D video pass-through HDMI standby pass-through allows access to all HDMI connected devices without having to power on the receiver 40 AM/FM presets remote control 17-1/8W x 6-5/16H x 12-15/16D weight: 18.1 lbs. warranty: 2 years Klipsch RP-4000F Standing only 34 tall and less than 8 wide, yet able to produce deep bass extension, The RP-4000F floorstanding speaker takes your movies and music to another level by delivering incredible sound from our signature Klipsch Tractrix® horn-loaded technology and spun copper Cerametallic™ woofers.   Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Dual 4 Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Dual binding posts for bi-wire/bi-amp Strong, Flexible Removable Magnetic Grille Dimensions: 34.12” x 7.42” x 12.03”   SPECIFICATIONS FREQUENCY RESPONSE 37Hz - 25kHz SENSITIVITY 95dB @2.83V / 1m POWER HANDLING (CONT/PEAK) 75W / 300W NOMINAL IMPEDANCE 8 Ohm Compatible CROSSOVER FREQUENCY 1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER Dual 4” Cerametallic Cone Woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 34.12” (86.7 cm) WIDTH 7.42” (18.85 cm) DEPTH 12.03” (30.56 cm) WEIGHT 29 lb (13.1 kg) FINISH Ebony BUILT FROM 2018   Klipsch RP-400C FREQUENCY RESPONSE 65Hz - 25kHz SENSITIVITY 95dB @2.83V / 1m POWER HANDLING (CONT/PEAK) 75W / 300W NOMINAL IMPEDANCE 8 Ohm Compatible CROSSOVER FREQUENCY 1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER Dual 4” Cerametallic Cone Woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 5.6” (14.24 cm) WIDTH 16” (40.64 cm) DEPTH 9.65” (22.86 cm) WEIGHT 14 lb (6.4 kg) FINISH Ebony ACCESSORIES Rubber Feet (4) BUILT FROM 2018   Klipsch RP-400M The RP-400M bookshelf speakers offer maximum versatility without sacrificing performance from a small, yet elegant audio solution. Designed as main speakers for a compact living space or surround sound to support a Reference Premiere speaker system, the RP-400M bookshelf speakers are the ideal choice for your home theater system.   Features:   1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn 4 Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Premium Scratch-Resistant Finish Strong, Flexible Removable Magnetic Grille Dimensions: 11.73” x 5.67” x 7.50”   SPECIFICATIONS FREQUENCY RESPONSE 52Hz - 25kHz SENSITIVITY 93dB @2.83V / 1m POWER HANDLING (CONT/PEAK) 50W / 200W NOMINAL IMPEDANCE 8 Ohm Compatible CROSSOVER FREQUENCY 1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER 4” Cerametallic Cone Woofer ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 11.73” (29.8 cm) WIDTH 5.67” (14.4 cm) DEPTH 7.50” (19.1 cm) WEIGHT 9 lb (4.1 kg) FINISH Ebony ACCESSORIES Rubber Feet (8) BUILT FROM 2018 Klipsch R-100SW Features: ● 10″ Front-Firing Spun-Copper IMG Woofer ● All-Digital Amplifierwith 300 Watts Peak Power ● Volume, Low Pass Crossoverand Phase Control ● Line Level/LFE RCA Inputs for Maximu
฿87,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ร้านค้าแนะนำ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO A-9110 HIGHLIGHTS 50 W + 50 W high-current amplification WRAT (Wide Range Amplification Technology) Direct Mode for source-authentic audio reproduction Phase Matching Bass Boost High-current EI transformer, large custom audio capacitors, and discrete output stage MM phono input, 4 x RCA New fine display for easy source selection   AMPLIFICATION FEATURES WRAT (Wide Range Amplifier Technology) Customized high-current EI transformer Two large custom-fabricated audio-grade main capacitors Optimum Gain Volume Circuitry for clear low-volume playback Four-ohm speaker-driving capability Phase Matching Bass Boost Rigid anti-resonant 1.6 mm metal chassis Direct Mode for source-authentic audio reproduction   CONNECTION FEATURES 4 analog RCA inputs 1 phono input with discrete MM phono equalizer 1 analog RCA line-level output Subwoofer pre-out Non-magnetic speaker posts with clear knobs 6.35 mm headphone jack RI (Remote Interactive) input   ADDITIONAL FEATURES Fine display shows active input Independent tone controls for bass and treble with balance control Easy-to-use controls for smooth operation without a remote RI (Remote Interactive) input enables connection of a supported component for integrated control with one remote controller Auto Power Standby Available in silver or black   GENERAL SPECIFICATIONS Power output: 50 W + 50 W (4 ohms, 20 Hz–20 kHz, 0.9% THD, 2-ch driven, IEC) Frequency response: 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode) Dimensions (W x H x D): 435 x 129 x 330 mm Weight: 7.0 kg   ONKYO C-7030 Key Features VLSC™ (Vector Linear Shaping Circuitry) Precision Clock High Quality 192 kHz/24-Bit DAC Fully Flat Anti-Vibration Chassis   Specifications Plays Audio CD, CD-R, CD-RW, MP3 CD* VLSC™ (Vector Linear Shaping Circuitry) for Pulse Noise Reduction Custom-Designed Massive EI Transformers Precision Clock (±10 ppm) High Quality 192 kHz/24-Bit D/A Converter Differential Headphone Amplifier Circuitry 25-Track Memory Playback Random and Repeat Playback Function 2 Digital Audio Outputs (Optical and Coaxial) Analog Audio Output 1.6 mm-Thick Anti-Vibration Full-Flat Chassis Solid Aluminum Front Panel 3-Mode Display Dimmer (Normal/Dim/Dimmer) Auto Standby Function RI (Remote Interactive) Remote Control   Klipsch RP-400M FREQUENCY RESPONSE 52Hz - 25kHz SENSITIVITY 93dB @2.83V / 1m POWER HANDLING (CONT/PEAK) 50W / 200W NOMINAL IMPEDANCE 8 Ohm Compatible CROSSOVER FREQUENCY 1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER 4” Cerametallic Cone Woofer ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 11.73” (29.8 cm) WIDTH 5.67” (14.4 cm) DEPTH 7.50” (19.1 cm) WEIGHT 9 lb (4.1 kg) FINISH Ebony ACCESSORIES Rubber Feet (8) BUILT FROM 2018
฿46,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-RZ50 With up to 11.2 channels of processing, DIRAC Live® Room Correction, and the coveted THX Certification, the Onkyo TX-RZ50 AV Receiver is a best-in-class home theater powerhouse. The TX-RZ50 delivers enormous power on-demand to highlight every nuance of the music, movies, and games you love. Groundbreaking DIRAC Live® Room Correction technology offers improved musical staging, clarity, dialog, and deeper bass right out of the box, ensuring that your immersive surround experience is delivered with the highest fidelity. Featuring three HDMI-out options, the TX-RZ50 AV receiver delivers uncompressed HDMI 8K/4K transfer at 40 Gbps, increasing the bandwidth over its predecessors and taking full advantage of the capabilities of Next-Gen gaming consoles. Put through thousands of tests to obtain the coveted THX Certification, this SMART AV Receiver™ delivers a mind-blowing movie, music, and gaming experience to your home. These products support all specs for the 2021 HDMI 2.1 certification. Please ensure your source, TV and HDMI cables are compatible to get the most robust home theater experience possible. AMPLIFIER Power output (All channels) 250 W/Ch (6 ohms, 1 kHz, 10% THD, 1 channel driven) 120 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2 channels driven, FTC) Dynamic power 250 W (3 ohms, Front) 220 W (4 ohms, Front) 130 W (8 ohms, Front) THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, half power) Input sensitivity and impedance 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM) Rated RCA output level and impedance 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out) Frequency response 5 Hz–100 kHz/+1 dB, -3 dB (Direct Mode) Tone control ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-noise ratio 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A) Speaker impedance 4–16 ohms GENERAL Power supply AC 120 V~, 60 Hz Power consumption (operating) 850 W Power consumption (idle) 75 W Power consumption (standby) 0.1 W Dimensions (W x H x D) 17 1/8˝ x 7 15/16˝ x 15 11/16˝ (435 x 201.5 x 398 mm) Weight 30.9 lbs. (14.0 kg) Klipsch RP-8000F II สเปค FREQUENCY RESPONSE 35-25kHz +/- 3dB SENSITIVITY 98dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK) 150W/600W NOMINAL IMPEDANCE 8 Ohms Compatible CROSSOVER FREQUENCY 1630Hz HIGH FREQUENCY DRIVER 1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVER Dual 8″ Cerametallic Cone Woofers with Faraday rings ENCLOSURE MATERIAL MDF (Internally Braced) ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Dual binding posts / bi-wire / bi-amp with Dolby Atmos® passthrough HEIGHT INCHES (MM) 43.10″ (109.5 cm) WIDTH INCHES (MM) 10.84″ (27.5 cm) DEPTH INCHES (MM)  18.25″ (46.3 cm) PRODUCT WEIGHT LBS (KG) 61.4lb (27.85kg) FINISH Ebony, Walnut Klipsch RP-500C II สเปค FREQUENCY RESPONSE 56-25kHz +/- 3dB SENSITIVITY 94dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK) 100W/400W NOMINAL IMPEDANCE 8 Ohms Compatible CROSSOVER FREQUENCY 1630Hz HIGH FREQUENCY DRIVER 1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVER Dual 5.25″ Cerametallic™ Cone Woofers with Faraday rings ENCLOSURE MATERIAL MDF (Internally Braced) ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single aluminum binding posts HEIGHT INCHES (MM) 6.87″ (17.4 cm) WIDTH INCHES (MM) 19.34″ (49.1 cm) DEPTH INCHES (MM)  10.58″ (26.9 cm) PRODUCT WEIGHT LBS (KG) 18.3lb (8.30kg) FINISH Ebony, Walnut ACCESSORIES Angle screw Klipsch RP-500M II สเปค FREQUENCY RESPONSE 50-25kHz +/- 3dB SENSITIVITY 92dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK) 100W/400W NOMINAL IMPEDANCE 8 Ohms Compatible CROSSOVER FREQUENCY 1530Hz HIGH FREQUENCY DRIVER 1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVER Dual 5.25″ Cerametallic™ Cone Woofers with Faraday rings ENCLOSURE MATERIAL MDF (Internally Braced) ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single aluminum binding posts HEIGHT INCHES (MM) 13.56″ (34.4 cm) WIDTH INCHES (MM) 6.81″ (17.3 cm) DEPTH INCHES (MM)  10.65″ (27.0 cm) PRODUCT WEIGHT LBS (KG) 13.1lb (5.95kg) FINISH Ebony, Walnut ACCESSORIES Angle screw
฿165,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ร้านค้าแนะนำ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-SR393 Specifications Amplifier Section Power output (Front L/R / Center / Surround L/R): - 155 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven) - 135 W/Ch (6 Ω, 1 kHz, 1% THD, 1 channel driven, IEC) THD+N (Total Harmonic Distortion + Noise): 0.08% (20 Hz–20 kHz, Half Power) Input sensitivity and impedance: 200 mV rms/47 kΩ (Line) Frequency response: 10 Hz - 100 kHz/+1 dB, -3 dB (Direct Mode) Tone control: - ±10 dB, 20 Hz (Bass) - ±10 dB, 20 kHz (Treble) Signal-to-noise ratio: 109 dB (Line, IHF-A) Speaker impedance: 4 Ω - 16 Ω Tuner Section Tuning frequency range: - FM 87.5 MHz - 108 MHz - AM 530 kHz - 1,710 kHz, 522 kHz - 1,611 kHz FM/AM preset memory: 40 Stations General Power supply: AC 220–240 V~, 50/60 Hz Power consumption: 465 W Standby power consumption: 0.2 W Dimensions (W x H x D): 435 x 160 x 328 mm Weight: 8.2 kg Supplied Accessories - Indoor FM antenna - AM loop antenna - Quick Start Guide - Setup Mic for AccuEQ - Remote controller - AAA (R03) batteries x 2 Klipsch R-51M สเปค FREQUENCY RESPONSE 62Hz – 21kHz +/- 3dB SENSITIVITY 93 dB @ 2.83V/1M POWER HANDLING (CONT/PEAK) 85W/340W NOMINAL IMPEDANCE 8 ohms Compatible CROSSOVER FREQUENCY 1,660 Hz HIGH FREQUENCY DRIVER 1” Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER Single 5.25” spun-copper IMG woofer ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass-Reflex via rear-fring ports INPUTS Single Gold Plated Binding Posts HEIGHT INCHES (MM) 13.3” (338 mm) WIDTH INCHES (MM) 7” (178 mm) DEPTH INCHES (MM) 8.5” (215 mm) FINISHES Black Textured Wood Grain Vinyl INCLUDED ACCESSORIES Rubber Feet (4) BUILT FROM 2018 Klipsch R-52C klipsch R-52C ลำโพง Center ขนาด 2×5.25 นิ้ว 400 วัตต์ Get crystal-clear sound for your movie dialogue and music lyrics with the incredible acoustics from the R-52C center channel speaker. Our proprietary Tractrix® horn-loaded technology gives you a lifelike, front-row listening experience unlike any other.   Features: 1″ Aluminum LTS tweeter 90×90 Square Tractrix Horn Dual 5.25″ Spun-Copper IMG Woofers Strong, Flexible Removable Magnetic Grille Closed Back Design for Flexible Placement Dimensions: 7.3″ x 18.75″ x 7.6″   SPECIFICATIONS FREQUENCY RESPONSE  89Hz – 21kHz +/- 3dB SENSITIVITY        95 dB @ 2.83V/1M POWER HANDLING (CONT/PEAK)              100W/400W NOMINAL IMPEDANCE   8 ohms Compatible CROSSOVER FREQUENCY              1,630 Hz HIGH FREQUENCY DRIVER            1” Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER             Dual 5.25” spun-copper IMG woofers ENCLOSURE MATERIAL   MDF ENCLOSURE TYPE             Sealed INPUTS Single Gold Plated Binding Posts HEIGHT INCHES (MM)     7.3” (185 mm) WIDTH INCHES (MM)      18.75” (476 mm) DEPTH INCHES (MM)       7.6” (194 mm) FINISHES              Black Textured Wood Grain Vinyl INCLUDED ACCESSORIES               Rubber Feet (4) BUILT FROM       2018 Klipsch R-100SW Features: 1. 10″ Front-Firing Spun-Copper IMG Woofer 2. All-Digital Amplifierwith 300 Watts Peak Power 3. Volume, Low Pass Crossoverand Phase Control 4. Line Level/LFE RCA Inputs for Maximum Receiver Compatibility 5. Dimensions: 14.5″ x 12.5″ x 16.4″ 6. Black Textured Wood Grain Vinyl   Specifications FREQUENCY RESPONSE 32Hz – 120Hz +/- 3dB MAXIMUM ACOUSTIC OUTPUT 112 dB AMPLIFIER All Digital AMPLIFIER POWER (CONT/PEAK) 150W/300W AMPLIFIER FEATURES Volume, Low-pass, 0/180 phase, Auto Power On DRIVER COMPONENTS 10” high excursion spun-copper IMG woofer ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass-Reflex via rear-fring port INPUTS Line level/LFE RCA jacks HEIGHT 14.5” (368 mm) WIDTH 12.5” (318 mm) DEPTH 16.4” (417 mm) FINISHES Black Textured Wood Grain Vinyl BUILT FROM 2018  
฿59,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ชุดเครื่องเสียง Klipsch คลิปช์ : ONKYO TX-NR6100 Wireless Connectivity Wi-Fi Wi-Fi 5 (802.11ac); Dual-Band (2.4 & 5 GHz) Bluetooth Yes Supported Audio Codecs AAC, aptX, aptX HD, SBC Wireless Audio Protocols AirPlay 2, Chromecast built-in, DTS Play-Fi Control Virtual Assistant Works with Alexa, Works with Google Assistant Tuner Section Tuner Type AM, FM Number of Tuner Presets 40 Stations Radio Frequencies
฿134,900
Shopee
hificenterthailand
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-NR5100 Tuner Section Tuner Type AM, FM Number of Tuner Presets 40 Stations Radio Frequencies AM: 530 to 1710 kHz FM: 87.5 to 107.9 MHz Power AC Input Power 120 VAC, 60 Hz Power Consumption Active: 490 W No Sound: 45 W Standby: 0.1 W Physical Dimensions (W x H x D) 17.1 x 6.3 x 12.9 / 435.0 x 160.0 x 328.0 mm Weight 18.5 lb / 8.4 kg Packaging Info Package Weight 21.94 lb Box Dimensions (LxWxH) 20.7 x 16.4 x 9.4 Klipsch R-50M FREQUENCY RESPONSE: 58Hz - 21kHz +/- 3dB SENSITIVITY*: 92 dB (In-Room) POWER HANDLING (CONT/PEAK): 75W/300W NOMINAL IMPEDANCE: 8 ohms Compatible CROSSOVER FREQUENCY: 1,560 Hz HIGH FREQUENCY DRIVER: 1 Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER: Single 5.25 spun-copper TCP woofer ENCLOSURE MATERIAL: MDF ENCLOSURE TYPE: Bass-Reflex via rear-firing ports INPUTS: Single Gold Plated Binding Posts HEIGHT INCHES (MM): 13.9 (354 mm) WIDTH INCHES (MM): 7 (178 mm) DEPTH INCHES (MM): 9 (229 mm) PRODUCT WEIGHT LBS (KG): 11 lbs (5 kg) FINISH: Black Textured Wood Grain Vinyl Klipsch R-30C SPECIFICATIONS FREQUENCY RESPONSE - 78Hz - 21kHz +/- 3dB SENSITIVITY - 96 dB (In-Room) POWER HANDLING (CONT/PEAK) - 100W/400W NOMINAL IMPEDANCE - 8 ohms Compatible CROSSOVER FREQUENCY - 1,650 Hz HIGH FREQUENCY DRIVER - 1 Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER - Quad 3.5 spun-copper TCP woofers ENCLOSURE MATERIAL - MDF ENCLOSURE TYPE - Bass-Reflex via forward-firing Tractrix®ports INPUTS - Single Gold Plated Binding Posts HEIGHT INCHES (MM) - 5.0 (126 mm) WIDTH INCHES (MM) - 26 (660 mm) DEPTH INCHES (MM) - 6.8 (173 mm) PRODUCT WEIGHT LBS (KG) - 13 lbs (5.9 kg) FINISH - Black Textured Wood Grain Vinyl Klipsch R-40M Speaker System Speaker Configuration 2-Way Power Handling 50 W RMS per Channel 200 W Peak per Channel Drivers 1 x 1 / 25.4 mm Aluminum Horn Tweeter (Front-Firing, per Speaker) 1 x 4 / 101.6 mm Copper-Spun Graphite Cone Woofer (Front-Firing, per Speaker) Passive Radiators No Enclosure Type Bass-Reflex Ports 1 x Rear-Firing (per Speaker) Frequency Response 71 Hz to 21 kHz (±3 dB) Impedance 8 Ohms Wired I/O 1 x Binding Post Pair Input Crossover 1770 Hz Sensitivity 91 dB Input Impedance 8 Ohms Physical Placement & Mounting Options Tabletop/Bookshelf Keyhole(s), Wall-Mount (with Optional Hardware) Cabinet Material MDF Grille Cloth (Removable) Dimensions 5.7 x 11.7 x 8.5 / 146 x 298 x 216 mm (Each) Weight 7.1 lb / 3.2 kg (Each) Packaging Info Package Weight 17.89 lb Box Dimensions (LxWxH) 15.8 x 15.8 x 11.4 Klipsch R-120SW Subwoofer Subwoofer Type Active Enclosure Type Bass-Reflex Amplifier Power Rating 200 W RMS 400 W Peak Drivers 1 x 12 / 30.5 cm Copper-Spun Graphite (Front-Firing) Frequency Response 29 to 120 Hz Inputs/Outputs 1 x RCA Input (LFE) Maximum SPL 116 dB Phase Adjustment 0 / 180° Power AC Input Power 100 to 240 VAC, 50 / 60 Hz Physical Cabinet Material MDF Dimensions 14 x 16.5 x 19.2 / 356 x 419 x 488 mm Weight 31.0 lb / 14.1 kg Packaging Info Package Weight 40 lb Box Dimensions (LxWxH) 24 x 21.5 x 18.75
฿82,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ร้านค้าแนะนำ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-NR7100 Specifications Amplifier Section Power output (All channels) 220 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC) Dynamic power 250 W (3 ohms, Front) 220 W (4 ohms, Front) 130 W (8 ohms, Front) THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, half power) Input sensitivity and impedance 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM) Rated RCA output level and impedance 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out) Frequency response 10 Hz–100 kHz/+1 dB, -3 dB (Direct/Pure Audio) Tone control ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-noise ratio 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A) Speaker impedance 4–16 ohms Video Section Input sensitivity/output level and impedance Video 1.0 Vp–p/75 ohms (Component Y) 0.7 Vp–p/75 ohms (Component Pb/Pr) 1.0 Vp–p/75 ohms (Composite) Tuner Section Tuning frequency range FM 87.5 MHz–107.9 MHz AM 530 kHz–1,710 kHz FM/AM preset memory 40 stations General Power supply AC 120 V~, 60 Hz Power consumption (operating) 750 W Power consumption (idle) 75 W Power consumption (standby) 0.1 W Dimensions (W x H x D) 17 1/8˝ x 6 13/16˝ x 14 15/16˝ (435 x 173.5 x 379.5 mm) Weight 22.9 lbs. (10.4 kg) UPC CODE (B) 889951003496 CARTON Dimensions (W x H x D) 21˝ x 10 7/16˝ x 18 7/16˝ (534 x 265 x 468 mm) Weight 29.8 lbs. (13.5 kg) Supplied Accessories • Power cord • Indoor FM antenna • AM loop antenna • Speaker setup microphone • Quick Start Guide • Remote controller • AAA (R03) batteries x 2 Klipsch RP-5000F ii สเปค FREQUENCY RESPONSE40-25kHz +/- 3dB SENSITIVITY95dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK)100W/400W NOMINAL IMPEDANCE8 Ohms Compatible CROSSOVER FREQUENCY1900Hz HIGH FREQUENCY DRIVER1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVER5.25″ Cerametallic Cone Woofer with Faraday rings ENCLOSURE MATERIALMDF (Internally Braced) ENCLOSURE TYPEBass Reflex via rear-firing Tractrix® Port INPUTSDual aluminum binding posts / bi-wire / bi-amp with Dolby Atmos® passthrough HEIGHT INCHES (MM)36.10 (91.7 cm) WIDTH INCHES (MM)8.15″ (20.7 cm) DEPTH INCHES (MM) 14.75″ (37.5 cm PRODUCT WEIGHT LBS (KG)38.6lb (17.55kg) FINISHEbony, Walnut Klipsch RP-500C ii สเปค FREQUENCY RESPONSE56-25kHz +/- 3dB SENSITIVITY94dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK)100W/400W NOMINAL IMPEDANCE8 Ohms Compatible CROSSOVER FREQUENCY1630Hz HIGH FREQUENCY DRIVER1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVERDual 5.25″ Cerametallic™ Cone Woofers with Faraday rings ENCLOSURE MATERIALMDF (Internally Braced) ENCLOSURE TYPEBass Reflex via rear-firing Tractrix® Port INPUTSSingle aluminum binding posts HEIGHT INCHES (MM)6.87″ (17.4 cm) WIDTH INCHES (MM)19.34″ (49.1 cm) DEPTH INCHES (MM) 10.58″ (26.9 cm) PRODUCT WEIGHT LBS (KG)18.3lb (8.30kg) FINISHEbony, Walnut ACCESSORIESAngle screw Klipsch RP-500M ii สเปค FREQUENCY RESPONSE50-25kHz +/- 3dB. SENSITIVITY92dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK)100W/400W NOMINAL IMPEDANCE8 Ohms Compatible CROSSOVER FREQUENCY1530Hz HIGH FREQUENCY DRIVER1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVERDual 5.25″ Cerametallic™ Cone Woofers with Faraday rings ENCLOSURE MATERIALMDF (Internally Braced) ENCLOSURE TYPEBass Reflex via rear-firing Tractrix® Port INPUTSSingle aluminum binding posts HEIGHT INCHES (MM)13.56″ (34.4 cm) WIDTH INCHES (MM)6.81″ (17.3 cm) DEPTH INCHES (MM) 10.65″ (27.0 cm) PRODUCT WEIGHT LBS (KG)13.1lb (5.95kg) FINISHEbony, Walnut ACCESSORIESAngle screw Klipsch RP-1000SW FREQUENCY RESPONSE19Hz – 131Hz +/- 3dB MAXIMUM ACOUSTIC OUTPUT118.5dB AMPLIFIER TYPEClass D with Analog Preamp Stage AMPLIFIER POWER300W RMS / 600W Peak WOOFER10″ Ultra Long Throw Cerametallic ENCLOSURE MATERIALMDF ENCLOSURE TYPEBass Reflex via Front-Firing Aerofoil Slot Port INPUTSDual RCA/LFE Line In, WA-2 Wireless Port HEIGHT16.64″ (42.3 cm) WIDTH15.00″ (38.1 cm) DEPTH24.96″ (63.4 cm) WEIGHT56.7 lbs (25.7 kg) FINISHEbony Vinyl
฿164,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ร้านค้าแนะนำ
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน hificenterthailand: ONKYO TX-NR7100 Specifications Amplifier Section Power output (All channels) 220 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC) Dynamic power 250 W (3 ohms, Front) 220 W (4 ohms, Front) 130 W (8 ohms, Front) THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, half power) Input sensitivity and impedance 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM) Rated RCA output level and impedance 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out) Frequency response 10 Hz–100 kHz/+1 dB, -3 dB (Direct/Pure Audio) Tone control ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-noise ratio 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A) Speaker impedance 4–16 ohms Video Section Input sensitivity/output level and impedance Video 1.0 Vp–p/75 ohms (Component Y) 0.7 Vp–p/75 ohms (Component Pb/Pr) 1.0 Vp–p/75 ohms (Composite) Tuner Section Tuning frequency range FM 87.5 MHz–107.9 MHz AM 530 kHz–1,710 kHz FM/AM preset memory 40 stations General Power supply AC 120 V~, 60 Hz Power consumption (operating) 750 W Power consumption (idle) 75 W Power consumption (standby) 0.1 W Dimensions (W x H x D) 17 1/8˝ x 6 13/16˝ x 14 15/16˝ (435 x 173.5 x 379.5 mm) Weight 22.9 lbs. (10.4 kg) UPC CODE (B) 889951003496 CARTON Dimensions (W x H x D) 21˝ x 10 7/16˝ x 18 7/16˝ (534 x 265 x 468 mm) Weight 29.8 lbs. (13.5 kg) Supplied Accessories • Power cord • Indoor FM antenna • AM loop antenna • Speaker setup microphone • Quick Start Guide • Remote controller • AAA (R03) batteries x 2 Klipsch RP-6000F ii สเปค FREQUENCY RESPONSE38-25kHz +/- 3dB SENSITIVITY96dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK)125W/500W NOMINAL IMPEDANCE8 Ohms Compatible CROSSOVER FREQUENCY1770Hz HIGH FREQUENCY DRIVER1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVERDual 6.5″ Cerametallic Cone Woofers with Faraday rings ENCLOSURE MATERIALMDF (Internally Braced) ENCLOSURE TYPEBass Reflex via rear-firing Tractrix® Port INPUTSDual binding posts / bi-wire / bi-amp HEIGHT INCHES (MM)39.60″ (100.6 cm) WIDTH INCHES (MM)9.29″ (23.6 cm) DEPTH INCHES (MM) 17.57″ (44.6 cm) PRODUCT WEIGHT LBS (KG)49.4lb (22.4kg) FINISHEbony, Walnut Klipsch RP-500C ii สเปค FREQUENCY RESPONSE56-25kHz +/- 3dB SENSITIVITY94dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK)100W/400W NOMINAL IMPEDANCE8 Ohms Compatible CROSSOVER FREQUENCY1630Hz HIGH FREQUENCY DRIVER1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVERDual 5.25″ Cerametallic™ Cone Woofers with Faraday rings ENCLOSURE MATERIALMDF (Internally Braced) ENCLOSURE TYPEBass Reflex via rear-firing Tractrix® Port INPUTSSingle aluminum binding posts HEIGHT INCHES (MM)6.87″ (17.4 cm) WIDTH INCHES (MM)19.34″ (49.1 cm) DEPTH INCHES (MM) 10.58″ (26.9 cm) PRODUCT WEIGHT LBS (KG)18.3lb (8.30kg) FINISHEbony, Walnut ACCESSORIESAngle screw Klipsch RP-500M ii สเปค FREQUENCY RESPONSE50-25kHz +/- 3dB. SENSITIVITY92dB @ 2.83V / 1m* POWER HANDLING (CONT/PEAK)100W/400W NOMINAL IMPEDANCE8 Ohms Compatible CROSSOVER FREQUENCY1530Hz HIGH FREQUENCY DRIVER1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn LOW FREQUENCY DRIVERDual 5.25″ Cerametallic™ Cone Woofers with Faraday rings ENCLOSURE MATERIALMDF (Internally Braced) ENCLOSURE TYPEBass Reflex via rear-firing Tractrix® Port INPUTSSingle aluminum binding posts HEIGHT INCHES (MM)13.56″ (34.4 cm) WIDTH INCHES (MM)6.81″ (17.3 cm) DEPTH INCHES (MM) 10.65″ (27.0 cm) PRODUCT WEIGHT LBS (KG)13.1lb (5.95kg) FINISHEbony, Walnut ACCESSORIESAngle screw Klipsch RP-1000SW FREQUENCY RESPONSE19Hz – 131Hz +/- 3dB MAXIMUM ACOUSTIC OUTPUT118.5dB AMPLIFIER TYPEClass D with Analog Preamp Stage AMPLIFIER POWER300W RMS / 600W Peak WOOFER10″ Ultra Long Throw Cerametallic ENCLOSURE MATERIALMDF ENCLOSURE TYPEBass Reflex via Front-Firing Aerofoil Slot Port INPUTSDual RCA/LFE Line In, WA-2 Wireless Port HEIGHT16.64″ (42.3 cm) WIDTH15.00″ (38.1 cm) DEPTH24.96″ (63.4 cm) WEIGHT56.7 lbs (25.7 kg) FINISHEbony Vinyl
฿174,900
Shopee
hificenterthailand
จังหวัดกรุงเทพมหานคร
ราคา ชุดโฮมเธียเตอร์ KLIPSCH THEATER PACK 5 1 พร้อม ONKYO TX SR494 รับประกันศูนย์ไทย SOUND REPUBLIC (25573968635)
ลด19%
ชุดเครื่องเสียง Klipsch คลิปช์ : ร้าน TRGMUSIC
฿48,800 ฿39,900
LAZADA
TRGMUSIC
ขายเเล้ว 1
ในประเทศ

ตัวกรองสินค้า

ยี่ห้อ

Klipsch คลิปช์ (26)

หมวดหมู่

ชุดเครื่องเสียง (44)