เสร็จสิ้น จัดเรียงตาม
พัดลม - ฮีทซิงค์
:
ร้าน syokstudynq.th: พัดลมตั้งโต๊ะ Noctua NF-F12 IndustrialPPC 2000 PWM ข้อมูลจำเพาะของพัดลม: 120x120x25 มม. ขนาด - 120x120x25 มม ระยะห่างของรูยึด - 105x105 มม. ขั้วต่อและโครงหมุด 4 พิน - PWM 4 พิน ความยาวสาย - 40 ซม. แบริ่งแบริ่ง SSO2 รูปทรงเรขาคณิตใบมีด - Heptaperf TM เทคโนโลยีเฟรม - FocusedFlowTM วัสดุที่ทำจากไฟเบอร์กลาสเสริมโพลีเอไมด์ การป้องกันทางเข้า - IP52 ประเภทมอเตอร์ - สามเฟส ความเร็วในการหมุน (+/- 10%) - 2000 รอบต่อนาที (+/- 10%) - 2000 รอบต่อนาที ความเร็วในการหมุนขั้นต่ำ (PWM, +/- 20%) - 450 รอบต่อนาที การไหลเวียนของอากาศ - 71.6cfm เสียงอะคูสติก - 29.7 dB (A) แรงดันคงที่ - 3.94 มม. H2O กำลังไฟฟ้าเข้าสูงสุด กำลังไฟฟ้าเข้าสูงสุด - 1.2 วัตต์ สูงสุด กระแสไฟฟ้าเข้าสูงสุด - 0.1 A แรงดันไฟฟ้าที่ใช้งาน - 12 V MTTF -> 150.000 ชม * หน่วยนี้ไม่ได้มาพร้อมกล่อง พัดลมเท่านั้นที่มีบรรจุภัณฑ์อย่างดี:) เทคโนโลยี Pokzol Tech เยี่ยมชมเพจของเรา: กรุณาแชทกับเราเพื่อขอการยืนยันสต็อกสินค้า ✔️ พีซีที่กำหนดเอง ✔️ พีซียี่ห้อเนม ✔️ สมุดบันทึกและแล็ปท็อป ✔️ อุปกรณ์ต่อพ่วงสำหรับเล่นเกม ✔️ จอภาพ ✔️ เก้าอี้เล่นเกม ✔️ ผลิตภัณฑ์เครือข่ายผลิตภัณฑ์เครือข่าย ✔️ อุปกรณ์คอมพิวเตอร์ ✔️ และอีกมากมาย!
฿2,009
4.0
(1)
พัดลม - ฮีทซิงค์
:
ร้าน sornn Shop: CASE FAN (พัดลมเคส) Noctua NF-F12 industrialPPC-2000 PWM มีกล่อง ใช้งานได้ปกติ ประกัน 7 วัน FAN Specification Size 120x120x25 mm Mounting hole spacing 105x105 mm Connector & pin-configuration 3-pin Cable length 40cm Bearing SSO2 Blade geometry Heptaperf™ Frame technology FocusedFlow™ Material Fibre-glass reinforced polyamide Ingress protection IP52 Motor type Three-phase Rotational speed (+/- 10%) 2000 RPM Airflow 121,8 m³/h Acoustical noise 29,7 dB(A) Static pressure 3,94 mm H₂O Max. input power 1,2 W Max. input current 0,1 A Operating voltage 12 V MTTF > 150.000 h Scope of delivery Fan 4 Fan Screws
฿659
5.0
(1)
จังหวัดกรุงเทพมหานคร
อื่นๆในหมวดอุปกรณ์คอมพิวเตอร์
:
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-F12 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the NF-F12 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as ag
฿1,190
พัดลม - ฮีทซิงค์
:
ร้าน eggcomptechnology.th: Noctua PWM Chromax Black Swap NF-F12 - Award-winning NF-F12 design - chromax.black.swap edition - Swappable anti-vibration pads in 6 colours - Heptaperf™ Impeller - Optional coloured cables - Optional coloured anti-vibration mounts - Focused Flow™ frame - AAO frame - Varying Angular Distance and Vortex Control Notches - Stepped Inlet Design - Inner Surface Microstructures - SSO2 bearing - Metal bearing shell - Custom-designed PWM IC with SCD - Stops at 0% PWM - 6-year manufacturer’s warranty
4.9
(13)
ร้านค้าทางการ
พัดลม - ฮีทซิงค์
:
ร้าน JIB Official Storeใน ShopeeMall : รายละเอียดสินค้าโดยย่อ Dimension 120 x 120 x 25 mm Source : noctua NF-F12 industrial PPC-2000 PWM
฿1,350
5.0
(3)
ขายเเล้ว 2
จังหวัดกรุงเทพมหานคร
พัดลม - ฮีทซิงค์
:
ร้าน 90-Store: พัดลม Noctua NF-F12 PWM Chromax black swap มือสอง เหมือนใหม่ ใช้งานได้ปกติ อุปกรณ์ครบกล่อง ------------------------------------------------ ประกันใจ 14วัน หากมีปัญหาคืนเงินเต็มจำนวน สินค้าต้องกลับมาในสภาพเดิม ห้ามแตก หัก ตก ไหม้ หรือตกน้ำ ------------------------------------------------ ตัดรอบส่งสินค้าทุกวันจันทร์-วันเสาร์ ( หยุดวันอาทิตย์ ) เวลา 14.00 น. โดยขนส่ง KERRY ------------------------------------------------ SPECIFICATION Size 120x120x25 mm Mounting hole spacing 105x105 mm Connector & pin-configuration 4-pin PWM Cable length 1cm + 30cm NA-EC1 extension cable Bearing SSO2 Blade geometry Heptaperf™ Frame technology Focused Flow™ Rotational speed (+/- 10%) 1500 RPM Min. rotational speed (PWM, +/-20%) 300 RPM Airflow 93,4 m³/h Acoustical noise 22,4 dB(A) Static pressure 2,61 mm H₂O Max. input power 0,6 W Max. input current 0,05 A Operating voltage 12 V MTTF > 150.000 h
฿690
จังหวัดนครราชสีมา
พัดลม - ฮีทซิงค์
:
ร้าน ursa.gaming.th: สิ่งที่คุณจะได้รับเมื่อคุณซื้อสินค้าที่ ESES Computer: ✔ ผู้ดูแลระบบที่เป็นมิตรกับสิ่งแวดล้อม ✔ สินค้าต้องเป็น ORI และเป็นสินค้าใหม่แน่นอน ข้อมูลจำเพาะ: รายละเอียดสินค้า รุ่น industrialPPC เป็นพัดลมความเร็วสูงสำหรับแอปพลิเคชันอุตสาหกรรม ด้วยเหตุนี้พวกเขาจึงไม่เงียบเหมือนแฟน Noctua คนอื่น ๆ และเหมาะสำหรับพีซีที่มีเสียงรบกวนต่ำ หากคุณไม่ต้องการความเร็วและประสิทธิภาพที่สูงขึ้นของรุ่นอุตสาหกรรมพีซีเราขอแนะนำให้ใช้รุ่นของสายผลิตภัณฑ์อื่น ๆ ของเรา (โครแมกซ์หากคุณต้องการพัดลมสีดำ) แทน ข้อมูลจำเพาะของ FAN Specification ขนาด 120x120x25 มม ระยะห่างของรูยึด 105x105 มม ขั้วต่อ PWM แบบ 4 ขาและขั้วต่อแบบพิน 4 ขา ความยาวสาย 40 ซม แบริ่ง SSO2 ใบมีดเรขาคณิต Heptaperf รูปทรงเรขาคณิต Heptaperf เทคโนโลยี FocusedFlow วัสดุไฟเบอร์กลาสโพลีเอไมด์เสริมแรง การป้องกันทางเข้า IP52 รถมอเตอร์ไซค์สามเฟส ความเร็วในการหมุน (+/- 10%) 2000 รอบต่อนาที ความเร็วในการหมุนขั้นต่ำ (PWM, +/- 20%) 450 รอบต่อนาที การไหลเวียนของอากาศ 121.8 m / h เสียงรบกวน 29.7 dB (A) แรงดันคงที่ 3.94 mm HO สูงสุด กำลังไฟฟ้าเข้า 1.2 W. สูงสุด กระแสไฟฟ้าเข้า 0.1 A แรงดันไฟฟ้า 12 V MTTF คือ 150,000 ชั่วโมง MTTF > 150,000 ชั่วโมง ขอบเขตการจัดส่ง พัดลมพัดลมพัดลมพัดลม สกรูพัดลม 4 ตัว รับประกัน 6 ปี ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ
฿1,741
ประเทศอินโดนีเซีย
พัดลม - ฮีทซิงค์
:
ร้าน Hotonix TH: ข้อมูลจำเพาะทั่วไปของข้อกำหนดทั่วไป 1. ขนาด: 120 มม. x 120 มม. x 25 มม 2. ระยะห่างของรูยึด: 105 มม. x 105 มม 3. แบริ่งแบริ่ง: SSO2 4. เทคโนโลยีเฟรม: Focused Flow™ 5. รูปทรงเรขาคณิตใบมีดใบมีด: Heptaperf™ 6. วัสดุ: วัสดุ: ใยแก้วโพลีเอไมด์เสริมแรง 7. Mtbf: 150,000 ชั่วโมง 8. ความยาวสายเคเบิล: 40 ซม ข้อกำหนด NF-F12 industrialPPC-2000 อุตสาหกรรม PPC-2000 1. การป้องกันทางเข้า: IP52 2. ประเภทมอเตอร์: สามเฟส 3. ความเร็วในการหมุน (+/- 10%): 2000 รอบต่อนาที 4. การไหลเวียนของอากาศ: 121.8m3 / h 5. ความดันคงที่: 3.94mmH2O 6. เสียงรบกวนจากอะคูสติก: 29.7dBA 7. กระแสไฟขาเข้า (ทั่วไป): 0.09A 8. แรงดันไฟฟ้าที่ใช้งาน: 12V 9. รายการแพ็คเกจ: พัดลม 1 ตัว, สกรู 4 ตัว ข้อกำหนด NF-F12 industrialPPC-2000 PWM สำหรับอุตสาหกรรม 1. การป้องกันทางเข้า: IP52 2. ประเภทมอเตอร์: สามเฟส 3. ความเร็วในการหมุน (+/- 10%): 2000 รอบต่อนาที 4: นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%): 450RPM 5. การไหลเวียนของอากาศ: 121.8m3 / h 6. ความดันคงที่: 3.94mmH2O 7. เสียงรบกวนจากอะคูสติก: 29.7dBA 8. กระแสไฟขาเข้า (ทั่วไป): 0.09A 9. แรงดันไฟฟ้าที่ใช้งาน: 12V 10. รายการแพ็คเกจ: พัดลม 1 ตัว, สกรู 4 ตัว ข้อกำหนด NF-F12 industrialPPC-3000 PWM 1. การป้องกันทางเข้า: IP52 2. ประเภทมอเตอร์: สามเฟส 3. ความเร็วในการหมุน (+/- 10%): 3000 รอบต่อนาที 4: นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%): 750RPM 5. การไหลเวียนของอากาศ: 186.7m3 / h 6. ความดันคงที่: 7.63mmH2O 7. เสียงรบกวนจากอะคูสติก: 43.5dBA 8. กระแสไฟขาเข้าของอินพุต (ทั่วไป): 0.26A 9. แรงดันไฟฟ้าที่ใช้งาน: 12V 10. รายการแพ็คเกจ: พัดลม 1 ตัว, สกรู 4 ตัว ข้อกำหนด NF-F12 industrialPPC-2000 IP67 PWM 1. การป้องกันทางเข้า: IP67 2. ประเภทมอเตอร์: สามเฟส 3. ความเร็วในการหมุน (+/- 10%): 2000 รอบต่อนาที 4: นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%): 450RPM 5. การไหลเวียนของอากาศ: 121.8m3 / h 6. ความดันคงที่: 3.94mmH2O 7. เสียงรบกวนจากอะคูสติก: 29.7dBA 8. กระแสไฟขาเข้า (ทั่วไป): 0.09A 9. แรงดันไฟฟ้าที่ใช้งาน: 12V 10. รายการแพ็คเกจ: พัดลม 1 ตัว, สกรู 4 ตัว ข้อกำหนด IP67 PWM NF-F12 industrialPPC-24V-2000 IP67 PWM 1. การป้องกันทางเข้า: IP67 2. ประเภทมอเตอร์: เฟสเดียว 3. ความเร็วในการหมุน (+/- 10%): 2000 รอบต่อนาที 4: นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%): 450RPM 5. ความเร็วในการหมุนที่ 12V (+/- 10%): 1050RPM 6. การไหลเวียนของอากาศ: 121.8m3 / h 7. ความดันคงที่: 3.94mmH2O 8. เสียงรบกวนจากอะคูสติก: 29.7dBA 9. ป้อนข้อมูลปัจจุบัน (ทั่วไป): 0.055A 10. แรงดันไฟฟ้าที่ใช้งาน: 24V 11. สัญญาณ PWM แรงดันไฟฟ้าแรงดันไฟฟ้า: 5V 12. รายการแพ็คเกจ: พัดลม 1 ตัว, สกรู 4 ตัว ข้อกำหนด IP67 PWM NF-F12 industrialPPC-24V-3000 IP67 PWM 1. การป้องกันทางเข้า: IP67 2. ประเภทมอเตอร์: เฟสเดียว 3. ความเร็วในการหมุน (+/- 10%): 3000 รอบต่อนาที 4: นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%): 750RPM 5. ความเร็วในการหมุน @ 12V (+/- 10%): 1600RPM 6. การไหลเวียนของอากาศ: 186.7m3 / h 7. ความดันคงที่: 7.63mmH2O 8. เสียงรบกวนจากอะคูสติก: 43.5dBA 9. กระแสไฟขาเข้า (ทั่วไป): 0.14A 10. แรงดันไฟฟ้าที่ใช้งาน: 24V 11. สัญญาณ PWM แรงดันไฟฟ้าแรงดันไฟฟ้า: 5V 12. รายการแพ็คเกจ: พัดลม 1 ตัว, สกรู 4 ตัว #NOCTUA #NFหม้อหุงข้าว ขาว-ฟ้า -F12 #PWM
฿1,411
5.0
(3)
ประเทศจีน
พัดลม - ฮีทซิงค์
:
ร้าน ursa.gaming.th: คุณสมบัติ: •การร่วมมือกับใบพัดสเตเตอร์ที่ยกระดับด้วยใบพัดเจ็ดใบที่คิดค้นขึ้นเป็นพิเศษระบบ Focused Flow TMของ NF-F12 สร้างแรงดันคงที่ที่ที่โดดเด่นและเน้นการไหลเวียนของอากาศเพื่อประสิทธิภาพที่เหนือกว่าของฮีทซิงค์และหม้อน้ำ ในขณะเดียวกันก็มีมาตรการการออกแบบทางอากาศพลศาสตร์ขั้นสูงที่หลากหลายแบริ่ง SSO-Bearing รุ่นที่สองและ PWM IC รุ่นใหม่ที่ออกแบบเองของ Noctua เพื่อการควบคุมอัตโนมัติอย่างเต็มที่เพื่อรับประกันความเงียบในการทำงาน ข้อมูลจำเพาะ: ข้อมูลจำเพาะของ FAN Specification ขนาด 120x120x25 มม ระยะห่างของรูยึด 105x105 มม ขั้วต่อ PWM แบบ 4 ขาและขั้วต่อแบบพิน 4 ขา สายต่อ NA-EC1 ขนาด 20 ซม. + 30 ซม. สายต่อ NA-EC1 แบริ่ง SSO2 ใบมีดเรขาคณิตเรขาคณิต Heptaperf TM เทคโนโลยีเฟรมโฟกัส FlowTM ความเร็วในการหมุน (+/- 10%) 1500 รอบต่อนาที ความเร็วในการหมุนด้วย LNA (+/- 10%) 1200 รอบต่อนาที นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%) 300 รอบต่อนาที การไหลเวียนของอากาศ 93.4 m3 / h การไหลเวียนของอากาศด้วย LNA 74,3 m3 / h เสียงอะคูสติก 22.4 dB (A) เสียงรบกวนจากอะคูสติกด้วย LNA 18.6 dB(A) แรงดันคงที่ 2.61 มม. H2O แรงดันคงที่พร้อม LNA 1,83 mm H2O กำลังไฟฟ้าเข้า (สูงสุด) 0.6 วัตต์ ป้อนข้อมูลปัจจุบัน (สูงสุด) 1.05 A 0.05 A แรงดันไฟฟ้า 12 V MTTF คือ 150,000 ชั่วโมง MTTF > 150,000 ชั่วโมง ขอบเขตการจัดส่ง อะแดปเตอร์เสียงรบกวนต่ำ (LNA) สายเคเบิล Y 4 พินแบบ 4 พิน สายต่อขยาย 30 ซม 4 ตัวช่วยสั่นสะเทือน สกรูพัดลม 4 ตัว รับประกัน 6 ปี * การซื้อสินค้าอาจรวมภาษีใบกำกับภาษีด้วย * การซื้อหมายถึงการเห็นด้วยกับหมายเหตุร้านค้า ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ
ประเทศอินโดนีเซีย
ร้านค้าทางการ
พัดลม - ฮีทซิงค์
:
ร้าน JIB Official Storeใน ShopeeMall : CASE FAN (พัดลมเคส) NOCTUA NF-F12 PWM CHROMAX.BLACK.SWAP
5.0
(2)
จังหวัดกรุงเทพมหานคร
พัดลม - ฮีทซิงค์
:
ร้าน enterkomtx.th: * คุณต้องสอบถามสต๊อกก่อนสั่งซื้อทางดิสคัสชั่น / แชท * รูปภาพเป็นเพียงภาพประกอบเวอร์ชันผลิตภัณฑ์อาจแตกต่างกันไปขึ้นอยู่กับนโยบายของผู้ขาย แต่ไม่ลดข้อมูลจำเพาะและฟังก์ชันของผลิตภัณฑ์ ข้อกำหนดทั้งหมดสามารถตรวจสอบผ่านเว็บไซต์อย่างเป็นทางการของผลิตภัณฑ์แต่ละชิ้น * * สามารถตรวจสอบข้อกำหนดทั้งหมดผ่านทางเว็บไซต์อย่างเป็นทางการของผลิตภัณฑ์แต่ละชิ้นได้ * ขอสีขนาด ฯลฯ ต้อง!!! รวมไว้ในคำอธิบายเมื่อสั่งซื้อ ถ้าไม่เราจะส่งหน่วยแบบสุ่ม น้ำหนักที่ระบุไม่รวมบรรจุภัณฑ์ไม้และประกัน ผลิตภัณฑ์ทั้งหมดที่สั่งซื้อเป็น MANDATORY!!! เพิ่มบรรจุภัณฑ์ไม้และประกัน สินค้าที่ซื้อแล้วไม่สามารถเปลี่ยนหรือคืนได้ * สินค้าที่ซื้อไปแล้วไม่สามารถเปลี่ยนหรือคืนได้ * * ตรวจสอบสภาพเมื่อได้รับสินค้า ร้องเรียนภายใน 3x24 ชั่วโมงนับจากเวลาที่ได้รับพัสดุ สิ่งสำคัญ! การร้องเรียนต้องรวมถึงการแกะกล่องวิดีโอ * * หากคุณไม่เข้าใจกรุณาสอบถามทางแชท! ผู้ซื้อควรรับผิดชอบราคาสินค้ารวมถึงค่าจัดส่งที่ควรเป็นภาระของผู้ซื้อ ผู้ซื้อควรรับผิดชอบราคาสินค้ารวมถึงค่าจัดส่งที่ควรเป็นภาระของผู้ซื้อ
฿1,793
ประเทศอินโดนีเซีย
พัดลม - ฮีทซิงค์
:
ร้าน ursa.gaming.th: สิ่งที่คุณจะได้รับเมื่อคุณซื้อสินค้าที่ ESES Computer: ✔ ผู้ดูแลระบบที่เป็นมิตรกับสิ่งแวดล้อม ✔ สินค้าต้องเป็น ORI และเป็นสินค้าใหม่แน่นอน ข้อมูลจำเพาะ: ข้อมูลจำเพาะของ FAN Specification ขนาด 120x120x25 มม ระยะห่างของรูยึด 105x105 มม ขั้วต่อ PWM แบบ 4 ขาและขั้วต่อแบบพิน 4 ขา สายต่อ NA-EC1 ความยาวสาย 1 ซม. + 30 ซม. แบริ่ง SSO2 ใบมีดเรขาคณิต Heptaperf รูปทรงเรขาคณิต Heptaperf เทคโนโลยีเฟรมเฟรมโฟกัสโฟกัสโฟกัสการไหล ความเร็วในการหมุน (+/- 10%) 1500 รอบต่อนาที นาที. ความเร็วในการหมุน (PWM, +/- 20%) 300 รอบต่อนาที การไหลเวียนของอากาศ 93.4 m / h เสียงอะคูสติก 22.4 dB (A) แรงดันคงที่ 2.61 มม. HO กำลังไฟฟ้าเข้าสูงสุด 0.6 W. กำลัง ป้อน ข้อมูล สูงสุด 0.05 A กระแส ป้อน ข้อมูล สูงสุด แรงดันไฟฟ้า 12 V MTTF คือ 150,000 ชั่วโมง MTTF > 150,000 ชั่วโมง ขอบเขตการจัดส่ง 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีดำ 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีน้ำเงิน 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีเขียว แผ่นป้องกันการสั่นสะเทือนสีแดง 4x NA-AVP1 chromax.red แผ่นป้องกันการสั่นสะเทือนสีขาว 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีขาว แผ่นป้องกันการสั่นสะเทือนสีเหลือง 4x NA-AVP1 chromax สกรูพัดลม 4x 4x ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ
ประเทศอินโดนีเซีย
พัดลม - ฮีทซิงค์
:
ร้าน eggcomptechnology.th: Pressure-optimised Nine-Blade Design Specifically developed for high-impedance applications such as CPU coolers, water-cooling radiators or cases with tight fan grills, the NF-P12 provides superior pressure and airflow performance. Vortex-Control Notches Psychoacoustic optimizations like the staggered make the NF-P12 surprisingly quiet. Smooth Commutation Drive The NF-P12's new drive system reduces torque variations and thereby ensures improved running smoothness. Self-stabilizing oil-pressure bearing Noctua's well proven SSO-Bearing technology guarantees supremely quiet operation and exceptional long-term stability. SPECIFICATION: https://noctua.at/en/nf-p12/specification
5.0
(4)
พัดลม - ฮีทซิงค์
:
ร้าน eggcomptechnology.th: FAN Specification Size 120x120x15 mm Mounting hole spacing 105x105 mm [Connector & pin-configuration](https://noctua.at/en/sip_productfaqnew/productfaq/view/id/215) 4-pin PWM Cable length 1cm + 30cm NA-EC1 extension cable Bearing [SSO2](https://noctua.at/en/sso2-bearing) Blade geometry A-Series with [Flow Acceleration Channels](https://noctua.at/en/flow-acceleration-channels) Frame technology [AAO (Advanced Acoustic Optimisation)](https://noctua.at/en/aao-frame) Rotational speed (+/- 10%) 1850 RPM Min. rotational speed (PWM, +/-20%) 450 RPM [Airflow](https://noctua.at/en/sip_productfaqnew/productfaq/view/id/162) 94,2 [m³/h](https://noctua.at/en/sip_productfaqnew/productfaq/view/id/162) Acoustical noise 23,9 dB(A) Static pressure 1,53 mm H₂O Max. input power 1,56 W Max. input current 0,13 A Operating voltage 12 V [Voltage PWM signal](https://noctua.at/en/where-can-i-find-a-technical-documentation-and-specifications-of-the-pwm-speed-control-system-of-noctuas-fans-) 5 V MTTF > 150.000 h Scope of delivery - 8x NA-AVP7 chromax.black anti-vibration pads - 8x NA-AVP7 chromax.blue anti-vibration pads - 8x NA-AVP7 chromax.green anti-vibration pads - 8x NA-AVP7 chromax.red anti-vibration pads - 8x NA-AVP7 chromax.white anti-vibration pads - 8x NA-AVP7 chromax.yellow anti-vibration pads - 4x fan screws [Warranty](https://noctua.at/en/warranty-terms-condition) 6 years
฿1,534
5.0
(7)
พัดลม - ฮีทซิงค์
:
ร้าน Tttle2543: Fan พัดลมระบายความร้อน noctua nf-p12 redux -1700 pwm ของใหม่เพิ่งได้มาจากการเคลม ประกันยาวกับ att (5 ปี ++) เสียงเงียบโฟลว์ลมดีมาก Size 120x120x25 mm สนใจทักมาสอบถามได้ครับ
฿450
5.0
(1)
จังหวัดฉะเชิงเทรา
พัดลม - ฮีทซิงค์
:
ร้าน Alpaca Computer: Alpaca ร้าน Alpaca เป็นร้านค้าออนไลน์ ไม่มีหน้าร้าน ทางร้านเป็นร้านขายอุปกรณ์คอมพิวเตอร์ อุปกรณ์ไอที เกตเจ็ท ซึ่งเป็นสินค้าจากแบรนด์ชั้นนำ ได้แก่ ASUS GALAX LIAN-LI JONSBO COOLERMASTER เป็นต้น รายละเอียดสินค้า Size : 120x120x25 mm Mounting hole spacing : 105x105 mm Connector : 4-pin PWM Bearing : SSO2 Blade Geometry : Heptaperf™ Frame Technology : Focused Flow™ Rotational Speed (+/- 10%) : 1500 RPM Min. Rotational Speed (PWM, +/-20%) : 300 RPM Airflow : 93,4 m³/h Acoustical Noise : 22,4 dB(A) Static Pressure : 2,61 mm H₂O Max. Input Power : 0,6 W Max. Input Current : 0,05 A Voltage : 12 V MTTF : > 150.000 h วิธีการเคลมสินค้า 1..ลูกค้าสามารถฝากทางร้านทำเคลมสินค้ากับบริษัทผู้นำเข้า โดยระยะเวลาการเคลมจะขึ้นอยู่กับบริษัทผู้นำเข้าเป็นหลัก โดยจัดส่งสินค้าเคลมมายังร้านตามที่อยู่ 4/71 ซอยติวานนท์40 ถนนติวานนท์ อำเภอเมือง จังหวัดนนทบุรี 11000 2.ลูกค้าสามารถส่งเคลมสินค้ากับทางบริษัทผู้นำเข้าโดยตรง การตัดรอบคำสั่งซื้อสินค้า คำสั่งซื้อก่อน 15.00 น. จัดส่งภายในวัน คำสั่งซื้อหลังจาก 15.00 น. จัดส่งในวันถัดไป หรือ ในวันทำการ กรุณาถ่ายคลิปวีดิโอขณะเปิดกล่องพัสดุ หากสินค้าได้รับความเสียหายจากการขนส่ง แจ้งกับทางร้านพร้อมส่งคลิปให้กับทางร้านทันที ขอบคุณครับ
฿1,490
จังหวัดกรุงเทพมหานคร
พัดลม - ฮีทซิงค์
:
ร้าน FORCEz คอมพิวเตอร์: Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A12x15 is a highly optimised, premium quality quiet fan in size 120x15mm. Its 15mm slim design makes the NF-A12x15 ideal for space-restricted applications such as low-profile CPU coolers or HTPC cases. The PWM version sports Noctua’s custom-designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed during PWM control from 1850 to 1400rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands. 15mm slim design Having a thickness of only 15mm, the NF-A12x15 is much slimmer than standard 120x25mm fans. This makes it ideal for typical slim fan applications such as low-profile CPU coolers as well as for freeing up space by replacing standard 120x25mm fans on tower coolers, radiators or in PC cases. Metal-reinforced motor hub With many larger-diameter slim fan designs, the shorter axis and bearing lead to a reduced running stability and lifespan. The NF-A12x15 uses a metal-reinforced motor hub, a measure typically found in high-speed industrial fans, in order to guarantee Noctua’s signature stability and longevity. Flow Acceleration Channels The NF-A12x15 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. AAO frame Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency. Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments. Inner Surface Microstructures With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Integrated Anti-Vibration Pads Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. Custom-designed PWM IC with SCD Supporting fully automatic PWM speed control, the fan uses Noctua's custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds. Stops at 0% PWM When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow. Low-Noise Adaptor The NF-A12x15 PWM is supplied with a (L.N.A.) that reduces the maximum fan speed from 1850 to 1400rpm. The L.N.A. can be used either to run the fan at a fixed speed of 1400rpm or to cap the maximum speed when using automatic PWM control. Extensive cabling options The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control. SSO2 bearing The NF-A12x15 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. FAN Specification Size120x120x15 mm Mounting hole spacing105x105 mm Connector & pin-configuration4-pin PWM Cable length20cm + 30cm NA-EC1 extension cable BearingSSO2 Blade geometryA-Series with Flow Acceleration Channels Frame technologyAAO (Advanced Acoustic Optimisation) Rotational speed (+/- 10%)1850 RPM Rotational speed with L.N.A. (+/- 10%)1400 RPM Min. rotational speed (PWM, +/-20%)450 RPM Airflow94,2 m³/h Airflow with L.N.A.70,8 m³/h Acoustical noise23,9 dB(A) Acoustical noise with L.N.A.16,8 dB(A) Static pressure1,53 mm H₂O Static pressure with L.N.A.0,9 mm H₂O Max. input power1,56 W Max. input current0,13 A Operating voltage12 V Voltage PWM signal5 V MTTF> 150.000 h Scope of delivery Low-Noise Adaptor (L.N.A.) 4-pin y-cable 30cm extension cable NA-AV3 anti-vibration mounts Fan screws Warranty6 years
฿650
5.0
(1)
จังหวัดอุบลราชธานี
ร้านค้าทางการ
พัดลม - ฮีทซิงค์
:
ร้าน JIB Official Storeใน ShopeeMall : Noctua NF-A12x25 G2 PWM พัดลมขนาด 120 มม. ที่ออกแบบมาสำหรับประสิทธิภาพสูง ใช้มอเตอร์ SSO2 และใบพัด Sterrox LCP ให้แรงลม 107.3 m³/h พร้อมแรงดันลมสูง เหมาะทั้งฮีตซิง หม้อน้ำ และเคส ควบคุมด้วย 4-pin PWM เงียบเพียง 22.5 dBA อายุการใช้งานยาวนานกว่า 150,000 ชั่วโมง • ขนาด : 120 x 120 x 25 มม. • ความเร็วรอบพัดลม : 1800 RPM ±10% • อัตราการไหลของอากาศ : 107.3 m³/h • ระดับเสียงรบกวน : 22.5 dBA • ขั้วต่อพัดลม : 4-pin PWM • พัดลม x 1 Specification Detail ขนาด : 120 × 120 × 25 มม. ระยะห่างรูติดตั้ง : 105 × 105 มม. ขั้วต่อและพิน : 4-pin PWM ความยาวสาย : 20 ซม. + สายต่อขยาย NA-EC1 ขนาด 30 ซม. แบริ่ง : SSO2 รูปทรงใบพัด : Progressive-Bend Impeller เทคโนโลยีเฟรม : AAO (การปรับแต่งอะคูสติกขั้นสูง) วัสดุ : Sterrox LCP ความเร็วรอบ (±10%) : 1800 รอบต่อนาที ความเร็วรอบเมื่อใช้ L.N.A. (±10%) : 1500 รอบต่อนาที ปริมาณลม : 107.3 ลูกบาศก์เมตรต่อชั่วโมง ปริมาณลมเมื่อใช้ L.N.A. : 87.2 ลูกบาศก์เมตรต่อชั่วโมง ระดับเสียงรบกวน : 22.5 เดซิเบล (A) ระดับเสียงรบกวนเมื่อใช้ L.N.A. : 18.1 เดซิเบล (A) แรงดันสถิต : 3.14 มม. H2O แรงดันสถิตเมื่อใช้ L.N.A. : 1.71 มม. H2O กำลังไฟสูงสุด : 1.8 วัตต์ กระแสไฟสูงสุด : 0.15 แอมป์ แรงดันไฟฟ้าที่ใช้งาน : 12 โวลต์ อายุการใช้งานเฉลี่ย (MTTF) : มากกว่า 150,000 ชั่วโมง
฿1,670
5.0
(2)
ขายเเล้ว 1
จังหวัดกรุงเทพมหานคร
พัดลม - ฮีทซิงค์
:
ร้าน ursa.gaming.th: คุณสมบัติ: • NF-S12A เป็นหนึ่งในแฟน ๆ ที่มีชื่อเสียงและเป็นที่นิยมมากที่สุดของนอคตูอา ประสิทธิภาพการไหลเวียนของอากาศที่โดดเด่นและอะคูสติกที่ยอดเยี่ยมทำให้เหมาะสำหรับเคสระบายความร้อนและการใช้งานที่มีอิมพีแดนซ์ต่ำอื่น ๆ •รุ่น chromax.black.swap ผสมผสานประสิทธิภาพการระบายความร้อนที่เงียบอันเป็นเอกลักษณ์ของ NF-S12A เข้ากับการออกแบบสีดำทั้งหมดที่น่าสนใจและการรวมแผ่นป้องกันการสั่นสะเทือนสีแดงขาวน้ำเงินเขียวเหลืองและดำที่เปลี่ยนได้ซึ่งช่วยให้ปรับแต่งสีได้ การสร้างโทนสีให้ตรงกับพัดลมเพื่อให้เข้ากับโทนสีของแต่ละบุคคล ข้อมูลจำเพาะ: ข้อมูลจำเพาะของ FAN Specification ขนาด 120x120x25 มม ระยะห่างของรูยึด 105x105 มม ขั้วต่อ PWM แบบ 4 ขาและขั้วต่อแบบพิน 4 ขา สายต่อ NA-EC1 ความยาวสาย 1 ซม. + 30 ซม. แบริ่ง SSO2 ใบมีดเรขาคณิต S-Series พร้อมลูกบิดป้องกันแผงลอย เทคโนโลยีเฟรม AAO (การเพิ่มประสิทธิภาพอะคูสติกขั้นสูง) ความเร็วในการหมุน (+/- 10%) 1200 รอบต่อนาที นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%) 300 รอบต่อนาที การไหลเวียนของอากาศ 107.5 ม. / ชม เสียงอะคูสติก 17.8 dB (A) แรงดันคงที่ 1,19 มม. H2O กำลังไฟฟ้าเข้า (สูงสุด) กำลังไฟ 1.44 วัตต์ ป้อนข้อมูลปัจจุบัน (สูงสุด) 0.12 ก แรงดันไฟฟ้า 12 V MTTF คือ 150,000 ชั่วโมง MTTF > 150,000 ชั่วโมง ขอบเขตการจัดส่ง 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีดำ 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีน้ำเงิน 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีเขียว แผ่นป้องกันการสั่นสะเทือนสีแดง 4x NA-AVP1 chromax.red แผ่นป้องกันการสั่นสะเทือนสีขาว 4x NA-AVP1 chromax แผ่นป้องกันการสั่นสะเทือนสีขาว แผ่นป้องกันการสั่นสะเทือนสีเหลือง 4x NA-AVP1 chromax สกรูพัดลม 4x 4x รับประกัน 6 ปี * การซื้อสินค้าอาจรวมภาษีใบกำกับภาษีด้วย * การซื้อหมายถึงการเห็นด้วยกับหมายเหตุร้านค้า ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ
ประเทศอินโดนีเซีย
ร้านค้าแนะนำ
พัดลม - ฮีทซิงค์
:
ร้าน Ocingtek Store: ลักษณะการทำงาน: หลังจากได้รับรางวัลและคำแนะนำมากมายจากเว็บไซต์ฮาร์ดแวร์และนิตยสารระหว่างประเทศ NF-A9x14 ได้ก่อตั้งตัวเองเป็นตัวเลือกเริ่มต้นเมื่อพูดถึงแฟน ๆ ที่บางเฉียบ 92 มม. คุณภาพสูง Chromax.black.swap edition ผสมผสานประสิทธิภาพการระบายความร้อนที่เงียบสงบอันเป็นเอกลักษณ์ของ NF-A9x14 เข้ากับการออกแบบสีดำทั้งหมดที่น่าดึงดูดและชุดของแผ่นป้องกันการสั่นสะเทือนสีแดงสีขาวสีน้ำเงินสีเขียวสีเหลืองและสีดำที่ช่วยให้ปรับแต่งสีได้ ของพัดลมเพื่อให้เข้ากับโทนสีที่สร้างแต่ละบุคคล เติมด้วยแบริ่ง SSO2 เกรดพรีเมี่ยมที่เชื่อถือได้ของ Noctua มากกว่า 150,000 ชั่วโมง MTTF และการรับประกันของผู้ผลิต 6 ปี NF-9x14 PWM chromax สีดำสลับเป็นตัวเลือกที่สมบูรณ์แบบสำหรับผู้ใช้ทุกคนที่ให้ความสำคัญกับการสร้างความสวยงามเช่นเดียวกับ มากเท่ากับคุณภาพและประสิทธิภาพชั้นนำของชั้นเรียน
4.9
(15)
ประเทศจีน
พัดลม - ฮีทซิงค์
:
ร้าน eggcomptechnology.th: Award-winning NF-A20 design Having received dozens of recommendations from the international press, Noctua’s NF-A20 has become a proven premium choice for 200mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world. chromax.black.swap edition Maximising colour choices, Noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red. Swappable anti-vibration pads in 6 colours The NF-A20 PWM chromax.black.swap comes with 4 white, red, blue, green and yellow as well as 8 black NA-AVP6 anti-vibration pads. By combining the various colours with black or going all black, the fan can be coordinated with most popular build colour schemes out of the box. Additional NA-SAVP6 sets for outfitting both sides in one colour can be purchased separately. Optional coloured cables Noctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black NA-EC1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm NA-EC1 cables plus corresponding NA-YC1 y-cables are available separately Optional coloured anti-vibration mounts To complement the coloured anti-vibration pads included with the fans, users can purchase chromax line NA-SAV2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans. 154mm, 110x180mm and 170mm hole spacing In order to ensure broad compatibility with today’s PC cases, the NF-A20 features three sets of mounting holes: While the 154x154mm and 110x180mm spacing allow it to replace most 200mm fans, the 170x170mm spacing is used by many 230 and 250mm fans, which can thus also be replaced by the NF-A20.* Noctua NF- A20 PWM Chromax.Black.Swap Having received dozens of awards and recommendations from international hardware websites and magazines, the NF-A20 has established itself as a default choice when it comes to premium-quality 200mm fans. The chromax.black.swap edition combines the NF-A20’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables and anti-vibration mounts are available separately. Topped off with Noctua’s trusted premium-grade SSO2 bearing, more than 150,000 hours MTTF and 6-year manufacturer’s warranty, the NF-A20 PWM chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance
พัดลม - ฮีทซิงค์
:
ร้าน ursa.gaming.th: สิ่งที่คุณจะได้รับเมื่อคุณซื้อสินค้าที่ ESES Computer: ✔ ผู้ดูแลระบบที่เป็นมิตรกับสิ่งแวดล้อม ✔ สินค้าต้องเป็น ORI และเป็นสินค้าใหม่แน่นอน คุณสมบัติ: หลังจากได้รับรางวัลและคำแนะนำมากมายจากเว็บไซต์และนิตยสารฮาร์ดแวร์สากล NF-A8 ได้สร้างตัวเองเป็นทางเลือกเริ่มต้นเมื่อพูดถึงแฟน ๆ 80 มม. คุณภาพเยี่ยม รุ่น chromax.black.swap ผสมผสานประสิทธิภาพการระบายความร้อนที่เงียบสงบของ NF-A8s เข้ากับการออกแบบสีดำทั้งหมดที่น่าสนใจและการรวมแผ่นป้องกันการสั่นสะเทือนสีแดงขาวน้ำเงินเขียวเหลืองและดำที่เปลี่ยนได้ซึ่งช่วยให้ปรับแต่งสีของ แฟน ๆ จะจับคู่รูปแบบสี ข้อมูลจำเพาะ: ข้อมูลจำเพาะของ FAN Specification ขนาด 80x80x25 มม ระยะห่างของรูยึด 71.5x71.5 มม ขั้วต่อ PWM แบบ 4 ขาและขั้วต่อแบบพิน 4 ขา สายต่อ NA-EC1 ความยาวสาย 1 ซม. + 30 ซม. แบริ่ง SSO2 เรขาคณิตใบมีดเรขาคณิตของใบมีด A-Series พร้อมช่องเร่งการไหล เทคโนโลยีเฟรม AAO (การเพิ่มประสิทธิภาพอะคูสติกขั้นสูง) ความเร็วในการหมุน (+/- 10%) 2200 รอบต่อนาทีความเร็วในการหมุน (+/- 10%) นาที. ความเร็วในการหมุนที่ 20% PWM (+/- 20%) 450 รอบต่อนาที การไหลเวียนของอากาศ 55.5 ม. / ชม เสียงอะคูสติก 17.7 dB (A) แรงดันคงที่ 2.37 มม. HO สูงสุด กำลังไฟฟ้าเข้า 0.96 W. สูงสุด กระแสไฟฟ้าเข้า 0.08 A แรงดันไฟฟ้า 12 V MTTF คือ 150,000 ชั่วโมง MTTF > 150,000 ชั่วโมง ขอบเขตการจัดส่ง 8x NA-AVP5 chromax แผ่นป้องกันการสั่นสะเทือนสีดำ 4x NA-AVP5 chromax แผ่นป้องกันการสั่นสะเทือนสีน้ำเงิน 4x NA-AVP5 chromax แผ่นป้องกันการสั่นสะเทือนสีเขียว แผ่นป้องกันการสั่นสะเทือนสีแดง NA-AVP5 4x chromax 4x NA-AVP5 chromax แผ่นป้องกันการสั่นสะเทือนสีขาว 4x NA-AVP5 chromax แผ่นป้องกันการสั่นสะเทือนสีเหลือง สกรูพัดลม 4x 4x รับประกัน 6 ปี ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ ราคาสินค้ารวมค่าจัดส่งที่ผู้ซื้อควรเป็นผู้รับผิดชอบ
฿1,406
ประเทศอินโดนีเซีย
พัดลม - ฮีทซิงค์
:
ร้าน ร้านค้าใน Esteban Quinn: พารามิเตอร์ผลิตภัณฑ์ ขนาด: 120X120X1 5 มม ระยะห่างของรูยึด: 105X105MM เชื่อมต่อ: 4-PIN PWM เพลา: SSO2 การออกแบบใบ: ช่องทางเร่งการไหลแบบอนุกรม เทคโนโลยีเฟรม: AAO (การเพิ่มประสิทธิภาพอะคูสติก) ความเร็ว (+/- 10%): 1,850 รอบต่อนาที LNA ความเร็วในการตก (+/- 10%): 1,400 รอบต่อนาที จำกัด ความเร็วด้านล่าง (PWM, +/- 20%): 450 รอบต่อนาที ปริมาณอากาศ: 94.2 M3 / H ปลายน้ำ LNA: 70.8 เมตร / ชั่วโมง เสียงรบกวน: 23.9 เดซิเบล (A) เสียงรบกวนที่ LNA: 16,8 DB (A) แรงดันคงที่: 1.53 มม. HO ความดันสถิต LNA: 0.9 มม. H2O กำลังไฟฟ้าเข้าสูงสุด: 1.56w อินพุตปัจจุบัน Cap: 0.13A แรงดันไฟฟ้า: 12V แรงดันขั้ว PWM: 5V อุปกรณ์เสริม: อะแดปเตอร์เสียงรบกวนต่ำ (LNA) สาย 4-PINY: สายต่อ 30 ซม NA-SAV3 Damping เล็บพลาสติก: สกรูพัดลม การออกแบบบาง 15 มม NF-A12X15 มีความหนาเพียง 15 มม. เหมาะสำหรับการใช้งานพัดลมบางทั่วไปเช่นตัวระบายความร้อนซีพียูทาวเวอร์ต่ำซึ่งสามารถเปลี่ยนพัดลมมาตรฐาน 120X25 มม. เพิ่มพื้นที่สำหรับทาวเวอร์คูลเลอร์หรือเปลี่ยนพัดลมเคสพีซี ฮับมอเตอร์โลหะเสริม NF-A12X15 ใช้โลหะเสริม ฮับมอเตอร์ซึ่งเป็นมาตรการที่มักใช้กับพัดลมอุตสาหกรรมความเร็วสูงเพื่อให้แน่ใจว่าพัดลม NOCTUA มีเสถียรภาพและอายุการใช้งานที่ยาวนาน ช่องทางเร่งการจราจร ใบพัด PWM NF-A12X15 มีลักษณะของอากาศถูกดูดผ่านช่องเร่งการไหลด้านข้าง การแยกกระแสลมจากด้านดูดสามารถลดลงได้โดยการเร่งการไหลของอากาศในพื้นที่ใบพัดด้านนอกที่สำคัญเพื่อให้ได้เสียงกระแสน้ำวนที่มีประสิทธิภาพและต่ำ แผ่นกันกระแทกแบบบูรณาการ แผ่นป้องกันการสั่นสะเทือนแบบบูรณาการที่ทำจากซิลิโคนนุ่มสามารถลดการส่งผ่านของการสั่นสะเทือนขนาดเล็กเมื่อพัดลมหมุนได้อย่างมีประสิทธิภาพในขณะที่รักษาความเข้ากันได้อย่างสมบูรณ์กับระบบติดตั้งมาตรฐานและคลิปพัดลมที่ใช้ในหม้อน้ำ ⚠ สำหรับรายละเอียดสินค้าโปรดติดต่อฝ่ายบริการลูกค้าซึ่งจะให้รายละเอียดแก่คุณ ⚠ โฟกัสที่ร้านมีเซอร์ไพรส์นะ ⚠ รูปแบบมากขึ้นโปรดพูดคุยในเวลาเพื่อติดต่อฝ่ายบริการลูกค้าเพื่อไม่ให้เสียเวลาอันมีค่าของคุณ ❤ โปรดระบุที่อยู่รับสินค้ากับร้านรับสินค้าเมื่อทำการสั่งซื้อ จะไม่สามารถเปลี่ยนที่อยู่ได้หลังจากสั่งซื้อ ❤ กรุณาตรวจสอบให้แน่ใจว่าได้รูปแบบที่ดีข้อมูลจำเพาะเมื่อสั่งซื้อในกรณีที่คุณเสียเวลาอันมีค่าของคุณส่งผลิตภัณฑ์ผิดพลาด ❤ หากพบปัญหาพิเศษเช่นสภาพอากาศหรือการจราจรระหว่างการขนส่งล่าช้าคาดว่าจะเข้าใจ ❤ คำถามใด ๆ หลังจากรับสินค้าคุณสามารถติดต่อเราได้ตลอดเวลา! ❤ ซื้อจำนวนมากส่วนตัวได้ เรา
จังหวัดสมุทรสาคร
พัดลม - ฮีทซิงค์
:
ร้าน ATT DISTRIBUTION: The NF-A9 is a highly optimised, premium quality quiet 92mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A9 further improves the renowned quiet cooling performance of the award-winning NF-B9. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2000 to 1550rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands. Succeeding the award-winning NF-B9 Noctua's NF-B9 fan has become a default-choice among PC enthusiasts looking for a premium quality quiet 92mm fan. Thanks to its thoroughgoing aerodynamic optimisations, the NF-A9 provides higher static pressure and an even better airflow/noise ratio than its much acclaimed predecessor. Flow Acceleration Channels The NF-A9 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. AAO frame Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency. Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments. Inner Surface Microstructures With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Integrated anti-vibration pads Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems. SSO2 Bearing The NF-A9 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. Custom-designed PWM IC with SCD Supporting fully automatic PWM speed control, the NF-A9 PWM uses Noctua's novel, custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds. Stops at 0% PWM When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow. Low-Noise Adaptor The NF-A9 PWM is supplied with a (L.N.A.) that reduces the maximum fan speed from 2000 to 1550rpm. The L.N.A. can be used either to run the fan at a fixed speed of 1550rpm or to cap the maximum speed when using automatic PWM control. Extensive cabling options The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second NF-A9 PWM fan to the same PWM fan header for automatic control. FAN Specification Size92x92x25 mm Mounting hole spacing82,5x82,5 mm Connector & pin-configuration4-pin PWM Cable length20cm + 30cm NA-EC1 extension cable BearingSSO2 Blade geometryA-Series with Flow Acceleration Channels Frame technologyAAO (Advanced Acoustic Optimisation) Rotational speed (+/- 10%)2000 RPM Rotational speed with L.N.A. (+/- 10%)1550 RPM Min. rotational speed (PWM, +/-20%)400 RPM Airflow78,9 m³/h Airflow with L.N.A.62,6 m³/h Acoustical noise22,8 dB(A) Acoustical noise with L.N.A.16,3 dB(A) Static pressure2,28 mm H₂O Static pressure with L.N.A.1,53 mm H₂O Max. input power1,2 W Max. input current0,1 A Operating voltage12 V MTTF> 150.000 h Scope of delivery Low-Noise Adaptor (L.N.A.) 4-Pin Y-Cable 30cm Extension Cable 4 Vibration-Compensators 4 Fan Screws Warranty6 years
5.0
(1)
จังหวัดฉะเชิงเทรา
ตัวกรองสินค้า
หมวดหมู่
พัดลม - ฮีทซิงค์
(2)
อื่นๆในหมวดอุปกรณ์คอมพิวเตอร์
(1)